The Murphy Builders Site

We just measured up our RV1512 rivets and came up with the following
numbers;

RV1512 rivets = 0.1496 decimal inches
5/32 = 0.1562
#21 drill = 0.1590

We have decided to drill out using a 5/32 drill and not #21 - why drill out
a bigger hole than needed? Isn't 0.010 difference too big a hole?

Peter & Monica
SR003 - Moose builders



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Depending on how many layers you are riveting you may wish you had a #20
drill. I did. Not all lots of rivets have the same dimensions either.
When I couldn't get one of the 5/32 in I would go to another lot I kept just
for the purpose because they were slightly smaller diameter and use one of
those. Managed to get by.

-----Original Message-----
From: capete@golden.net <capete@golden.net>
To: murphy-rebel@dcsol.com <murphy-rebel@dcsol.com>
Date: Friday, February 28, 2003 7:22 PM
Subject: 5/32 rivets

We just measured up our RV1512 rivets and came up with the following
numbers;

RV1512 rivets = 0.1496 decimal inches
5/32 = 0.1562
#21 drill = 0.1590

We have decided to drill out using a 5/32 drill and not #21 - why drill out
a bigger hole than needed? Isn't 0.010 difference too big a hole?

Peter & Monica
SR003 - Moose builders



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------