FUS-62

[scott.hibbs]

Thanks to Ken and Roger, I was about to use .032 but the .020 will work better.

-> Scott,
->
-> My inventory list indicates FUS-62 is two pieces of .020" 6061-T6 raw
material
-> measuring 7" X 48".
->
-> Roger Hoffman #687R
-> Eugene, OR USA!




*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[scott.hibbs]

My manual tells me to cut a strip from FUS-62 for gusset. I can't find FUS-
62. Can anyone tell me how thick the AL sheet is on FUS-62? This is the
gusset that covers the flanges on the cross-members between the rear wing
attach points.

Scott
rebel300R


*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rognal]

Scott,

My inventory list indicates FUS-62 is two pieces of .020" 6061-T6 raw material
measuring 7" X 48".

Roger Hoffman #687R
Eugene, OR USA!


*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[klehman]

Scott
Fus-62 is about 5" x 48" and 0.020 thick.
Ken

scott.hibbs@dcsol.com wrote:

My manual tells me to cut a strip from FUS-62 for gusset. I can't find FUS-
62. Can anyone tell me how thick the AL sheet is on FUS-62? This is the
gusset that covers the flanges on the cross-members between the rear wing
attach points.

Scott
rebel300R

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------