The Murphy Builders Site

Heads up on newer SR3500 kits - My elevator has the v-notch in the skin
already widened to prevent the interferance problem - I was laying it out
and thinking about which way to address the issue when I noticed that the
gusset has a smaller v-notch and didn't line up with the skin - An e-mail
to Brian @ MAM and he is sending out the correct gussett - Nice

Britt Reed - SR194 - Salt Lake City



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Heads up on the 3500 Elevator in the V section - This is for the Elevator
Skins that are prepunched at MAM to eliminate the interference problem -
There are two incorrect dimensions in the update manual.

1) The two ribs that are cut to allow the V ribs must be cut back closer
than shown in the update manual to prevent interference with the V ribs
(almost to within 1/4" of the final hole on the cutoff ribs).

2) The diagonal EL450 ribs that follow the new prepunched holes need to
connect to the spar 1-3/8" inboard from the second rib, not the 1-5/8"
stated in the update manual -


*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------