best practices regarding fuel tank fittings

[Jason Beall]

Hi all,

What's the best practice regarding fuel tank
fittings...should they have a sealant or fuel lube on
the threads before installation?

Also, I have installed float-type fuel gauge senders
which have a rubber gasket under the flange. Should it
go on dry, with sealant, fuel lube, etc?

Thanks,

-Jason

=====
________________________________________________

Jason Beall
Super Rebel No. 131
Aberdeen, Scotland, UK
super_rebel131@yahoo.com

__________________________________________________
Do You Yahoo!?
Yahoo! Health - Feel better, live better
http://health.yahoo.com



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rognal]

Jason,

Re: the fuel gauge (Stewart Warner's) gaskets, I installed mine dry on Wayne's
recommendation. No leaks when I pressure tested the tanks.

Roger Hoffman #687R
Eugene, OR USA!

8/7/02 6:00 PM, SUPER_REBEL131@YAHOO.COM wrote to MURPHY-REBEL:

-> Hi all,
->
-> What's the best practice regarding fuel tank
-> fittings...should they have a sealant or fuel lube on
-> the threads before installation?
->
-> Also, I have installed float-type fuel gauge senders
-> which have a rubber gasket under the flange. Should it
-> go on dry, with sealant, fuel lube, etc?
->
-> Thanks,
->
-> -Jason
->
-> =====
-> ________________________________________________
->
-> Jason Beall
-> Super Rebel No. 131
-> Aberdeen, Scotland, UK
-> super_rebel131@yahoo.com
->
-> __________________________________________________
-> Do You Yahoo!?
-> Yahoo! Health - Feel better, live better
-> http://health.yahoo.com





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Joel Jacobs]

----- Original Message -----
From: "Jason Beall" <super_rebel131@yahoo.com>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, August 07, 2002 3:19 PM
Subject: best practices regarding fuel tank fittings

Also, I have installed float-type fuel gauge senders
which have a rubber gasket under the flange. Should it
go on dry, with sealant, fuel lube, etc?

I didn't use a gasket on mine. I used proseal and rivets. It won't be easy
if I ever have to change them but they ain't gonna leak!

Joel
Rebel 416





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------