The Murphy Builders Site

Hey Roger,

We've been wondering about getting the CD. Can you give me a rough
idea as to what is "on it"? Cost? Where or how to get it?

TIA

Brian Lawson,
Windsor, Ontario.

EAA Chapter 185 Rebel 528
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
On Tue, 30 Jul 2002 07:01:32 -0800, you wrote:


SNIP

I did recently pickup the manual on CD and I
could send you the section on building the doors.
Roger Hoffman #687R
Eugene, OR USA!

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

All,

I know this won't be of any help to you Rebel builders, but I have just
zipped up the entire Moose manual CD-ROM. My CD was dated 06/21/02. The
file is 72.5 MB, so be sure you really want it before you try downloading...
even with a cable modem this is going to take a while! The file is located
in the SR2500/Moose Manual Updates file area.

Mike
195SR

----- Original Message -----
From: "Brian Lawson" <lawsonb@mnsi.net>
To: <murphy-rebel@dcsol.com>
Sent: Tuesday, July 30, 2002 4:59 PM
Subject: What's on the CD was Re: Photos of Door edge?


Hey Roger,

We've been wondering about getting the CD. Can you give me a rough
idea as to what is "on it"? Cost? Where or how to get it?

TIA

Brian Lawson,
Windsor, Ontario.

EAA Chapter 185 Rebel 528
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
On Tue, 30 Jul 2002 07:01:32 -0800, you wrote:


SNIP

I did recently pickup the manual on CD and I
could send you the section on building the doors.
Roger Hoffman #687R
Eugene, OR USA!

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Brian,

To be quite honest, I wasn't impressed with the CD. It appears to have simply
been burned onto a blank CD and put into a plastic CD case. Yet Murphy charged
$17.65 USD for a couple dollars worth of plastic and a few minutes of someones
time to copy it.

I bought it thinking it might have a lot of photographs showing details of the
aircraft's construction. You know, photos taken as the aircraft was being
built. But it mostly has only photos of finished aircraft.

The actual builder's manual on the CD may be of use to someone who has an old
manual, but mine is #687 so it is relatively current, so it was of no value to
me. Well, maybe I shouldn't say that...I can now take the manual to work with
me and read ahead using my laptop...heh, heh, heh.

Roger Hoffman #687R
Eugene, OR USA!



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Mike,

I looked but cannot find the Manual Updates for the SR2500/3500/Moose/? I
can find an empty folder for updates on the Maverick. Am I close?

Cheers, rj

R J Thomas
140SR

===========================================================

-----Original Message-----
From: Mike Davis [mailto:mike.davis@dcsol.com]
Sent: Tuesday, July 30, 2002 8:24 PM
To: murphy-rebel@dcsol.com
Subject: Re: What's on the CD was Re: Photos of Door edge?

All,

I know this won't be of any help to you Rebel builders, but I have just
zipped up the entire Moose manual CD-ROM. My CD was dated 06/21/02. The
file is 72.5 MB, so be sure you really want it before you try downloading...
even with a cable modem this is going to take a while! The file is located
in the SR2500/Moose Manual Updates file area.

Mike
195SR

----- Original Message -----
From: "Brian Lawson" <lawsonb@mnsi.net>
To: <murphy-rebel@dcsol.com>
Sent: Tuesday, July 30, 2002 4:59 PM
Subject: What's on the CD was Re: Photos of Door edge?


Hey Roger,

We've been wondering about getting the CD. Can you give me a rough
idea as to what is "on it"? Cost? Where or how to get it?

TIA

Brian Lawson,
Windsor, Ontario.

EAA Chapter 185 Rebel 528
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
On Tue, 30 Jul 2002 07:01:32 -0800, you wrote:


SNIP

I did recently pickup the manual on CD and I
could send you the section on building the doors.
Roger Hoffman #687R
Eugene, OR USA!

*-------------------------------------------------------------------------*
To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Once you click on "Files" you'll want to click on "Super Rebel & Moose", in
this group area 68 is "S Manual Updates". This is where the file is
located... you can also just click on the "New files" button, since it's
just recently been uploaded it will show up here.

Mike

----- Original Message -----
From: "RJ Thomas" <rj.thomas@Halliburton.com>
To: <murphy-rebel@dcsol.com>
Sent: Friday, August 02, 2002 5:28 AM
Subject: RE: What's on the CD was Re: Photos of Door edge?

Mike,

I looked but cannot find the Manual Updates for the SR2500/3500/Moose/? I
can find an empty folder for updates on the Maverick. Am I close?

Cheers, rj

R J Thomas
140SR

===========================================================

-----Original Message-----
From: Mike Davis [mailto:mike.davis@dcsol.com]
Sent: Tuesday, July 30, 2002 8:24 PM
To: murphy-rebel@dcsol.com
Subject: Re: What's on the CD was Re: Photos of Door edge?

All,

I know this won't be of any help to you Rebel builders, but I have just
zipped up the entire Moose manual CD-ROM. My CD was dated 06/21/02. The
file is 72.5 MB, so be sure you really want it before you try

downloading...

even with a cable modem this is going to take a while! The file is

located

in the SR2500/Moose Manual Updates file area.

Mike
195SR

----- Original Message -----
From: "Brian Lawson" <lawsonb@mnsi.net>
To: <murphy-rebel@dcsol.com>
Sent: Tuesday, July 30, 2002 4:59 PM
Subject: What's on the CD was Re: Photos of Door edge?


Hey Roger,

We've been wondering about getting the CD. Can you give me a rough
idea as to what is "on it"? Cost? Where or how to get it?

TIA

Brian Lawson,
Windsor, Ontario.

EAA Chapter 185 Rebel 528
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
On Tue, 30 Jul 2002 07:01:32 -0800, you wrote:


SNIP

I did recently pickup the manual on CD and I
could send you the section on building the doors.
Roger Hoffman #687R
Eugene, OR USA!

*-------------------------------------------------------------------------*

To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Mike,

I went there and looked. I see 67 S Personalities and 72 Flight Seeing but 68 S Manual Updates does not appear.

Coincidentally, if I click on the new files button with the 7 day default, I get a blank listing. I need to go out to 16 days to get one file in that listing (Jim Moore's floatless floatplane). 28 days yields a couple dozen or so.

Thinking that this might be an issue with an old bookmark, I closed the Microshaft(tm) browser (thanks and apologies to bobp) and re-launched it from the link on your e-mail reply. Same results.

Any ideas?

Cheers, rj

=======================================================================

-----Original Message-----
From: Mike Davis [mailto:mike.davis@dcsol.com]
Sent: Friday, August 02, 2002 8:44 AM
To: murphy-rebel@dcsol.com
Subject: Re: What's on the CD was Re: Photos of Door edge?

Once you click on "Files" you'll want to click on "Super Rebel & Moose", in
this group area 68 is "S Manual Updates". This is where the file is
located... you can also just click on the "New files" button, since it's
just recently been uploaded it will show up here.

Mike

----- Original Message -----
From: "RJ Thomas" <rj.thomas@Halliburton.com>
To: <murphy-rebel@dcsol.com>
Sent: Friday, August 02, 2002 5:28 AM
Subject: RE: What's on the CD was Re: Photos of Door edge?

Mike,

I looked but cannot find the Manual Updates for the SR2500/3500/Moose/? I
can find an empty folder for updates on the Maverick. Am I close?

Cheers, rj

R J Thomas
140SR

===========================================================

-----Original Message-----
From: Mike Davis [mailto:mike.davis@dcsol.com]
Sent: Tuesday, July 30, 2002 8:24 PM
To: murphy-rebel@dcsol.com
Subject: Re: What's on the CD was Re: Photos of Door edge?

All,

I know this won't be of any help to you Rebel builders, but I have just
zipped up the entire Moose manual CD-ROM. My CD was dated 06/21/02. The
file is 72.5 MB, so be sure you really want it before you try

downloading...

even with a cable modem this is going to take a while! The file is

located

in the SR2500/Moose Manual Updates file area.

Mike
195SR

----- Original Message -----
From: "Brian Lawson" <lawsonb@mnsi.net>
To: <murphy-rebel@dcsol.com>
Sent: Tuesday, July 30, 2002 4:59 PM
Subject: What's on the CD was Re: Photos of Door edge?


Hey Roger,

We've been wondering about getting the CD. Can you give me a rough
idea as to what is "on it"? Cost? Where or how to get it?

TIA

Brian Lawson,
Windsor, Ontario.

EAA Chapter 185 Rebel 528
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
On Tue, 30 Jul 2002 07:01:32 -0800, you wrote:


SNIP

I did recently pickup the manual on CD and I
could send you the section on building the doors.
Roger Hoffman #687R
Eugene, OR USA!

*-------------------------------------------------------------------------*

To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*


*-------------------------------------------------------------------------*
To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

Thanks for the heads up! It should work fine now... for some reason the security settings didn't take. Some time ago I added file areas for manual updates and service bulletins for each aircraft. Seems only the manual updates area for the Maverick took the security setting correctly. Anyway, I've reset them and checked them, you should be able to access the file fine now.

Mike

----- Original Message -----
From: RJ Thomas (rj.thomas@Halliburton.com)
To: murphy-rebel@dcsol.com (murphy-rebel@dcsol.com)
Sent: Friday, August 02, 2002 6:10 AM
Subject: RE: What's on the CD was Re: Photos of Door edge?



Mike,

I went there and looked. I see 67 S Personalities and 72 Flight Seeing but 68 S Manual Updates does not appear.

Coincidentally, if I click on the new files button with the 7 day default, I get a blank listing. I need to go out to 16 days to get one file in that listing (Jim Moore's floatless floatplane). 28 days yields a couple dozen or so.

Thinking that this might be an issue with an old bookmark, I closed the Microshaft(tm) browser (thanks and apologies to bobp) and re-launched it from the link on your e-mail reply. Same results.

Any ideas?

Cheers, rj

Mike,

Thanks! I am downloading the file now.

I hope you realize how much we all appreciate your efforts.

Cheers, rj
===============================
-----Original Message-----
From: Mike Davis [mailto:mike.davis@dcsol.com]
Sent: Friday, August 02, 2002 9:31 AM
To: murphy-rebel@dcsol.com
Subject: Re: What's on the CD was Re: Photos of Door edge?

Thanks for the heads up! It should work fine now... for some reason the security settings didn't take. Some time ago I added file areas for manual updates and service bulletins for each aircraft. Seems only the manual updates area for the Maverick took the security setting correctly. Anyway, I've reset them and checked them, you should be able to access the file fine now.



Mike

----- Original Message -----

From: RJ Thomas (rj.thomas@Halliburton.com)

To: murphy-rebel@dcsol.com (murphy-rebel@dcsol.com)

Sent: Friday, August 02, 2002 6:10 AM

Subject: RE: What's on the CD was Re: Photos of Door edge?



Mike,

I went there and looked. I see 67 S Personalities and 72 Flight Seeing but 68 S Manual Updates does not appear.

Coincidentally, if I click on the new files button with the 7 day default, I get a blank listing. I need to go out to 16 days to get one file in that listing (Jim Moore's floatless floatplane). 28 days yields a couple dozen or so.

Thinking that this might be an issue with an old bookmark, I closed the Microshaft(tm) browser (thanks and apologies to bobp) and re-launched it from the link on your e-mail reply. Same results.

Any ideas?

Cheers, rj

No problem... not only do I have a tremendous resource for my own project which is just starting, but I actually enjoy doing it!

Mike

----- Original Message -----
From: RJ Thomas (rj.thomas@Halliburton.com)
To: murphy-rebel@dcsol.com (murphy-rebel@dcsol.com)
Sent: Friday, August 02, 2002 6:46 AM
Subject: RE: What's on the CD was Re: Photos of Door edge?



Mike,

Thanks! I am downloading the file now.

I hope you realize how much we all appreciate your efforts.

Cheers, rj
===============================
-----Original Message-----
From: Mike Davis [mailto:mike.davis@dcsol.com]
Sent: Friday, August 02, 2002 9:31 AM
To: murphy-rebel@dcsol.com (murphy-rebel@dcsol.com)
Subject: Re: What's on the CD was Re: Photos of Door edge?

Thanks for the heads up! It should work fine now... for some reason the security settings didn't take. Some time ago I added file areas for manual updates and service bulletins for each aircraft. Seems only the manual updates area for the Maverick took the security setting correctly. Anyway, I've reset them and checked them, you should be able to access the file fine now.



Mike

----- Original Message -----

From: RJ Thomas (rj.thomas@Halliburton.com)

To: murphy-rebel@dcsol.com (murphy-rebel@dcsol.com)

Sent: Friday, August 02, 2002 6:10 AM

Subject: RE: What's on the CD was Re: Photos of Door edge?



Mike,

I went there and looked. I see 67 S Personalities and 72 Flight Seeing but 68 S Manual Updates does not appear.

Coincidentally, if I click on the new files button with the 7 day default, I get a blank listing. I need to go out to 16 days to get one file in that listing (Jim Moore's floatless floatplane). 28 days yields a couple dozen or so.

Thinking that this might be an issue with an old bookmark, I closed the Microshaft(tm) browser (thanks and apologies to bobp) and re-launched it from the link on your e-mail reply. Same results.

Any ideas?

Cheers, rj