The Murphy Builders Site

?? where have you placed a fuel selector in the Rebel
There doesn't seem to be space under the floor
Also the cabin side of the carry-through doesn't seem right either
Have not been able to find any photos on it
Thanks


Keith Oliver
Elite #654 TD
N654ME (reserved)
Farmingdale, Maine




*-------------------------------------------------------------------------*
To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

Most Rebels don't have fuel selectors .They just use a ball valve at the
wing root where the fuel line comes into the cabin.
Drew Dalgleish

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----Original Message-----
From: murphy-rebel@dcsol.com [mailto:murphy-rebel@dcsol.com]On Behalf Of LisaFly99@aol.com
Sent: Tuesday, April 30, 2002 8:46 PM
To: murphy-rebel@dcsol.com
Subject: Re: Fuel selector Location


In a message dated 4/30/02 7:32:56 PM Central Daylight Time, drewjan@cabletv.on.ca writes:

Most Rebels don't have fuel selectors .They just use a ball valve at the
wing root where the fuel line comes into the cabin.
Drew Dalgleish

DREW
I've got a selector valve just in front of the front carry through and between the rudder petals. Also have upgraded ball valves at each wing root. I'll see about getting a picture tomorrow for KEITH. I put in the valve because I've got fuel injection and I c an shut down the system from there and run it dry. Then turn it on crank the engine and hit the pumps.
Phil&Lisa Smith