The Murphy Builders Site

Posted: **Fri Feb 17, 2012 10:04 pm**

In a message dated 3/31/02 4:22:53 PM Central Standard Time, rebelair@idirect.com writes:

Wayne, do you know of anyone who can accurately measure my tach? If that is
right, the Sensenich folks say the prop should be 62-63 inch pitch. The
prop does measure 74" in diameter. I did purchase the prop from MAM.

BRIAN
I have a prop tach you can borrow if needed. I could ship it out tomorrow.
Phil&Lisa Smith
#460R

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Fri Feb 17, 2012 10:04 pm**

Hi There

That is very kind of you! I will check with our local FBO and see if they have an accurate method. Would not want to put you to such trouble.

I will keep you posted as it is an interesting problem!

Cheers

Brian #328R

-----Original Message-----
From: murphy-rebel@dcsol.com [mailto:murphy-rebel@dcsol.com]On Behalf Of LisaFly99@aol.com
Sent: Sunday, March 31, 2002 8:12 PM
To: murphy-rebel@dcsol.com
Subject: Re: Prop Tach

In a message dated 3/31/02 4:22:53 PM Central Standard Time, rebelair@idirect.com writes:

Wayne, do you know of anyone who can accurately measure my tach? If that is
right, the Sensenich folks say the prop should be 62-63 inch pitch. The
prop does measure 74" in diameter. I did purchase the prop from MAM.
BRIAN
I have a prop tach you can borrow if needed. I could ship it out tomorrow.
Phil&Lisa Smith
#460R