The Murphy Builders Site

Hi Guys

Can anyone put me on the track to identify a Lycoming IO-360-B4A?

I am looking to find out what it is (said to be 180 HP, 8.5:1 comp, 2700
RPM) and things like is it a "good" or "bad" engine, are there any
things to watch out for like faults or ADs? Is it Dynafocal or Conical.

Any & all info is appreciated.

Thanks

Dave R.




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

I Dave,

I looked this engine up in "Lycoming SSP-397 Publication on Certificated
Engines"
and this is what it said.

IO-360-B4A, 180 HP, 2700 RPM, 100/100LL, 8.50.1, Dynafocal mounts,
Bendix fuel injection, S4LN-21 (impulse coupling) and S4LN-magnetos and an
O-360-A4A solid crankshaft. The engine S/N suffix -15.

As far as any plus or minus with this engine... I have no clue, but at least
armed with this information you have a start. I hope that helps.

Bruce G



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Dave,

According to the Lycoming Certificated Engine List,
www.prime-mover.org/Engines/Lycoming.Lyc-Cert-list.html, The IO-360-B4A is
similar to the -B1B but has S4LN-21 (impulse coupling) and S4LN-20 magnetos
and O-360-A4A solid crankshaft. The IO-360-B1B is the same as the -B1A
except for Bendix Fuel Injection System. The B1A is the same as the A1D
etc. etc. Did not see any mention about type of mounts.

----- Original Message -----
From: "David Ricker" <ricker@dbis.ns.ca>
To: <murphy-rebel@dcsol.com>
Sent: Sunday, March 17, 2002 6:56 PM
Subject: Lycoming Engine Question

Hi Guys

Can anyone put me on the track to identify a Lycoming IO-360-B4A?

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Lonnie & Bruce

So far this is about what I have been able to learn about this engine although
Grant @ MAM thought he also saw a helocopter ref there somewhere also. I am
going to have to get in contact with Lycoming to get a dimensional comparison
to the type MAM sells & says will fit before I will know more.

Thanks

Dave R.
Elite 583

Lonnie Benson wrote:

Dave,

According to the Lycoming Certificated Engine List,
www.prime-mover.org/Engines/Lycoming.Lyc-Cert-list.html, The IO-360-B4A is
similar to the -B1B but has S4LN-21 (impulse coupling) and S4LN-20 magnetos
and O-360-A4A solid crankshaft. The IO-360-B1B is the same as the -B1A
except for Bendix Fuel Injection System. The B1A is the same as the A1D
etc. etc. Did not see any mention about type of mounts.

----- Original Message -----
From: "David Ricker" <ricker@dbis.ns.ca>
To: <murphy-rebel@dcsol.com>
Sent: Sunday, March 17, 2002 6:56 PM
Subject: Lycoming Engine Question

Hi Guys

Can anyone put me on the track to identify a Lycoming IO-360-B4A?

** To unsubscribe, send e-mail to list-server@dcsol.com with **
** UNSUBSCRIBE MURPHY-REBEL in the message body on a line by itself **
** Archives located at http://rebel:builder@www.dcsol.com:81/default.htm **
** To contact the list admin, e-mail mike.davis@dcsol.com **

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------