No he wasn't building an Elite! When I looked at the parts again today and
noted that they were only .020, I figured they were probably Elite parts
that they had tried to use on the SR, as Rob had the tail feathers VERY
early in production. The Elite did come before the SR, as many that were
waiting for an SR at the time can attest too!
Another couple of parts, for "spares", to hit the peg board hooks on the
wall!!!! Sooner or later there will be an Elite through this shop! That's a
given!!
Thanks,
Wayne G. O'Shea
www.irishfield.on.ca
----- Original Message -----
From: "David Ricker" <
ricker@dbis.ns.ca>
To: <
murphy-rebel@dcsol.com>
Sent: Monday, February 04, 2002 7:28 PM
Subject: Re: SR-ST322
Wayne
Is the guy you got the Sasquatch from building an Elite also?
Out parts list calls out the ST-322 as a Front Centre Doubler, it goes in
the
centre part of the Stabilizer back to back to the spar (open end facing
forward). It and the Rear Centre Doubler are the reinforcements for the
Stabilizer mounting brackets.
Is it possible MAM issued these parts with the SR and changed them for
something
heavier like they did for the rudder horn area fix (both Elite & SR)?
Perhaps
the previous owner made a mistake and planned to replace the parts and
didn't or
maybe MAM just shipped too many parts....? Maybe you have the prototype
Elsquatch?
Hope this helps clear up the confusion!
Dave R.
Elite 583
"Wayne G. O'Shea" wrote:
Thanks Don! Maybe they are old parts that are no longer used! They were
in
the same box as all the spare Rudder parts and rudder "fix" parts, not
in
the 3500 upgrade box. Will have to track Rob down (need to pick up my
M-462RF from his garage anyway). Maybe he recalls what they were for.
Wayne
----- Original Message -----
From: "Don Boardman" <
dboardm3@twcny.rr.com>
To: <
murphy-rebel@dcsol.com>
Sent: Sunday, February 03, 2002 9:49 PM
Subject: Re: SR-ST322
look
29/06/98.
the
take
the
Wayne,
Looked today and a manual we received early September '01 has no
reference
to ST-322's that I could find. This section is dated 29/06/98 (same as
yours). We have done the 3500 upgrade on the Stab. I do not recall if
we
used such a part, it's been 7 months. I do not see a reference to it
in
the
upgrade instructions. Sorry can't be of more help.
Don Boardman
& Partner
Randy Bowers
SR130 Rome, NY
** To unsubscribe, send e-mail to
list-server@dcsol.com with
**
** UNSUBSCRIBE MURPHY-REBEL in the message body on a line by itself
**
** Archives located at
http://rebel:builder@www.dcsol.com:81/default.htm
**
** UNSUBSCRIBE MURPHY-REBEL in the message body on a line by itself
**
**
**
--
David A. Ricker P. Eng.
DARTEC Engineering Inc.
3 Tamarac Drive
Fall River, Nova Scotia
Canada, B2T 1E8
ricker@dbis.ns.ca
Ph. 902-860-0256
** To unsubscribe, send e-mail to
list-server@dcsol.com with
**
** UNSUBSCRIBE MURPHY-REBEL in the message body on a line by itself
**
**
**
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------