The Murphy Builders Site

Hi Guys

Working on the wing these days and I have come across a small question about
inspection/access hole covers which get mounted on the lower skin at the W-601
Wing Skin Doubler.

Presuming this is the same for Rebels & Elites (W-601 & skin), are the
inspection covers supposed to come with the kit? I have looked around the
manual and our inventory document and I haven't been able to find a record of
these covers (2 per wing) are they supposed to be a U-make it part? Part#?

Thanks

Dave R.
--
David A. Ricker P. Eng.
Fall River, Nova Scotia
Canada




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Dave:

U are right.U don't have to make them but you have to buy them. They are not
included in the kit at least they are not in mine either.Don't worry you
won't need them for a while.
Good Luck

Murray Cherkas
REBEL 505




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hi Murray

You have confirmed the word from another ELite builder, just thought it was odd
though since the access covers are supplied for the Stabilizer & Elevator. No
big deal, I just didn't want to make them and later find they had been included!

Dave R.

Murray & Carol wrote:

Dave:

U are right.U don't have to make them but you have to buy them. They are not
included in the kit at least they are not in mine either.Don't worry you
won't need them for a while.
Good Luck

Murray Cherkas
REBEL 505

** To unsubscribe, send e-mail to list-server@dcsol.com with **
** UNSUBSCRIBE MURPHY-REBEL in the message body on a line by itself **
** Archives located at http://rebel:builder@www.dcsol.com:81/default.htm **
** To contact the list admin, e-mail mike.davis@dcsol.com **

--
David A. Ricker P. Eng.
DARTEC Engineering Inc.
3 Tamarac Drive
Fall River, Nova Scotia
Canada, B2T 1E8
ricker@dbis.ns.ca
Ph. 902-860-0256





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------