Spinner Kit
Posted: Fri Feb 17, 2012 9:38 pm
In a conversation with Elaine, at MAM, I was told the spinner kit was changed
about 3 years ago and they ship only one spinner for all models now. The 0320
install now requires spacing the front bulkhead (which is different from the
old bulkhead) 1/2 " to meet the spinner.
Grant suggested I contact Sensenich about swapping my prop bolts for the
proper size. I will give them a call first before giving MAM more grief about
the bolts not being correct.
Bruce G 357R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
about 3 years ago and they ship only one spinner for all models now. The 0320
install now requires spacing the front bulkhead (which is different from the
old bulkhead) 1/2 " to meet the spinner.
Grant suggested I contact Sensenich about swapping my prop bolts for the
proper size. I will give them a call first before giving MAM more grief about
the bolts not being correct.
Bruce G 357R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------