Thrust Plate/Spinner fit

[Wayne G. O'Shea]

Bruce, when you clear that up (if there are various front spinner bulkheads
available) let us all know, so we can be specific for intended usage when we
order the 13" spinner assembly.

As for the prop bolts, MAM would have just ordered the 74DM?S6-0-5? prop
from Sensenich for you, as an assembly, and Sensenich would have shipped
with bolts to match the overall thickness with no knowledge of extra
spacers/squash plates etc being required.

Wayne

----- Original Message -----
From: <Legeorgen@cs.com>
To: <murphy-rebel@dcsol.com>
Sent: Saturday, January 19, 2002 11:23 AM
Subject: Re: Thrust Plate

Wayne,

A different forward bulkhead of a larger diameter would have worked, hence

no

spacers. Maybe MAM sent me the forward bulkhead intended for the 0360.

Bruce G 357R

** To unsubscribe, send e-mail to list-server@dcsol.com with

**

** UNSUBSCRIBE MURPHY-REBEL in the message body on a line by itself

**

** Archives located at http://rebel:builder@www.dcsol.com:81/default.htm

**

** To contact the list admin, e-mail mike.davis@dcsol.com

**




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Legeorgen]

Wayne and all,

I will let the list know what MAM says about the spinner set up, bulkhead and
bolts. If I order the prop and spinner from MAM, and MAM contacts Sensenich
and has them drop ship me a prop, is it to much for me to expect MAM to
clarify with Sensenich the proper bolts needed to go with their spinner set
up? Especially if the spinner requires spacing of the front bulkhead.

Bruce G 357R



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------