Page 1 of 1

SR fuel tank finger strainer

Posted: Fri Feb 17, 2012 9:37 pm
by Jason Beall
Hi all,

Am I missing something here? How to I attach the fuel
tank finger strainer to the inside of the fuel outlet
on my SR. The hole sizes are completely different? -Jason

=====
________________________________________________

Jason Beall
Super Rebel No. 131
Aberdeen, Scotland, UK
super_rebel131@yahoo.com

__________________________________________________
Do You Yahoo!?
Check out Yahoo! Shopping and Yahoo! Auctions for all of
your unique holiday gifts! Buy at http://shopping.yahoo.com
or bid at http://auctions.yahoo.com



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

SR fuel tank finger strainer

Posted: Fri Feb 17, 2012 9:37 pm
by Mike Kimball
Uh, oh. There are two different sizes of those aluminum fittings that get
riveted to the wing root. I almost made the same mistake it sounds like you
might have made. I test fitted the fuel strainer in the fitting before I
riveted it to make sure I had everything right. Big ones for the fuel
outlet and little ones for the sight tube and fuel drains if I remember
right. Hope you haven't riveted in place yet. If so you might have to
drill a new hole and plug the other one. Or maybe you could find a smaller
finger strainer (maybe for a car or motorcycle) although there might be an
issue with a smaller outlet not getting you the flow you need. If the
fitting you have is actually too big for the strainer there's a lot of pipe
fitting adapters out there. Good luck.

Mike Kimball
SR#044

-----Original Message-----
From: murphy-rebel@dcsol.com [mailto:murphy-rebel@dcsol.com]On Behalf Of
Jason Beall
Sent: Sunday, December 16, 2001 10:25 AM
To: murphy-rebel@dcsol.com
Subject: SR fuel tank finger strainer


Hi all,

Am I missing something here? How to I attach the fuel
tank finger strainer to the inside of the fuel outlet
on my SR. The hole sizes are completely different? -Jason

=====
________________________________________________

Jason Beall
Super Rebel No. 131
Aberdeen, Scotland, UK
super_rebel131@yahoo.com

__________________________________________________
Do You Yahoo!?
Check out Yahoo! Shopping and Yahoo! Auctions for all of
your unique holiday gifts! Buy at http://shopping.yahoo.com
or bid at http://auctions.yahoo.com

** To unsubscribe, send e-mail to list-server@dcsol.com with **
** UNSUBSCRIBE MURPHY-REBEL in the message body on a line by itself **
** Archives located at http://rebel:builder@www.dcsol.com:81/default.htm **
** To contact the list admin, e-mail mike.davis@dcsol.com **




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------