The Murphy Builders Site

I saw what appeared to be aluminum cable fairings where the rudder cables
exit the tailcone on Chris Gill's Super Rebel in Anchorage and thought they
were a nice touch. I found plastic ones at Aircraft Spruce (only $4.95 for
the pair) but would much prefer aluminum. Anyone know where you can get
aluminum ones? (Hopefully, Chris is still reading list messages even though
he isn't building anymore. He's where I want to be! Up in the air in his
SR!)

Mike Kimball
SR #044




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Dear Mike,

Avery Tools (www.averytools.com 800-652-8379) sells .025 aluminum fairings for
the RV series (Part #10725 US$12 for set of three). These are great folks and
their tool catalog is a great resource.

Jeffrey Steenson
Elite #714


On 12/10/2001 2:21 PM, MKIMBALL@GCI.NET wrote to MURPHY-REBEL:

-> I saw what appeared to be aluminum cable fairings where the rudder cables
-> exit the tailcone on Chris Gill's Super Rebel in Anchorage and thought they
-> were a nice touch. I found plastic ones at Aircraft Spruce (only $4.95 for
-> the pair) but would much prefer aluminum. Anyone know where you can get
-> aluminum ones? (Hopefully, Chris is still reading list messages even though
-> he isn't building anymore. He's where I want to be! Up in the air in his
-> SR!)
->
-> Mike Kimball
-> SR #044
->





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Mike,
I had bought those plastic ones but they do not have enough flange material
around the edge to cover the slots that I cut. I measured the inside dimensions
of the plastic and cut a pine block to fit. Next step was to bend a piece of
3003 alum around the wood block and then trim the oversize flange to fit my
airframe. It looks real nice and should give good service. If Santa brings a
digital camera I'll post some pics to the site.
Rick D.

Mike Kimball wrote:

I saw what appeared to be aluminum cable fairings where the rudder cables
exit the tailcone on Chris Gill's Super Rebel in Anchorage and thought they
were a nice touch. I found plastic ones at Aircraft Spruce (only $4.95 for
the pair) but would much prefer aluminum. Anyone know where you can get
aluminum ones? (Hopefully, Chris is still reading list messages even though
he isn't building anymore. He's where I want to be! Up in the air in his
SR!)

Mike Kimball
SR #044

** To unsubscribe, send e-mail to list-server@dcsol.com with **
** UNSUBSCRIBE MURPHY-REBEL in the message body on a line by itself **
** Archives located at http://rebel:builder@www.dcsol.com:81/default.htm **
** To contact the list admin, e-mail mike.davis@dcsol.com **

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Thanks. I just ordered two sets. One for me and one as a Christmas present
for the other SR builder here in Fairbanks.

Mike Kimball
SR#044

-----Original Message-----
From: murphy-rebel@dcsol.com [mailto:murphy-rebel@dcsol.com]On Behalf Of
steenson@dcsol.com
Sent: Monday, December 10, 2001 2:26 PM
To: murphy-rebel@dcsol.com
Subject: RE: Cable fairings


Dear Mike,

Avery Tools (www.averytools.com 800-652-8379) sells .025 aluminum fairings
for
the RV series (Part #10725 US$12 for set of three). These are great folks
and
their tool catalog is a great resource.

Jeffrey Steenson
Elite #714


On 12/10/2001 2:21 PM, MKIMBALL@GCI.NET wrote to MURPHY-REBEL:

-> I saw what appeared to be aluminum cable fairings where the rudder cables
-> exit the tailcone on Chris Gill's Super Rebel in Anchorage and thought
they
-> were a nice touch. I found plastic ones at Aircraft Spruce (only $4.95
for
-> the pair) but would much prefer aluminum. Anyone know where you can get
-> aluminum ones? (Hopefully, Chris is still reading list messages even
though
-> he isn't building anymore. He's where I want to be! Up in the air in
his
-> SR!)
->
-> Mike Kimball
-> SR #044
->



** To unsubscribe, send e-mail to list-server@dcsol.com with **
** UNSUBSCRIBE MURPHY-REBEL in the message body on a line by itself **
** Archives located at http://rebel:builder@www.dcsol.com:81/default.htm **
** To contact the list admin, e-mail mike.davis@dcsol.com **




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------