The Murphy Builders Site

Jim how do you search ebay for stuff like this? All I seem to be able to
find is art,toys and other junk.
Thanks drew dalgleish

At 09:58 PM 12/3/2001 EST, you wrote:

There are special Nut Plates used in fuel tanks. They have a dome on the

back

side to cover where the bolt comes through and a Oring on the flat side to
seal it. I would still cover it with Proseal just to be sure it did not

leak.

You have to be careful not to use a bolt to long as it will break through
the dome. I don't know a Part Number or a Source to get these but I did see
a bag of 100 get sold on ebay really cheap.
Jim

** To unsubscribe, send e-mail to list-server@dcsol.com with **
** UNSUBSCRIBE MURPHY-REBEL in the message body on a line by itself **
** Archives located at http://rebel:builder@www.dcsol.com:81/default.htm **
** To contact the list admin, e-mail mike.davis@dcsol.com **

-----------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Try the attached, just click on it


Keith Oliver
Elite #654 TD
N654ME (reserved)
Farmingdale, Maine




-----Original Message-----
From: murphy-rebel@dcsol.com [mailto:murphy-rebel@dcsol.com]On Behalf Of
Drew and Jan
Sent: Tuesday, December 04, 2001 11:24 AM
To: murphy-rebel@dcsol.com
Subject: Re: Fuel Tank Nutplates+ebay


Jim how do you search ebay for stuff like this? All I seem to be able to
find is art,toys and other junk.
Thanks drew dalgleish

At 09:58 PM 12/3/2001 EST, you wrote:

There are special Nut Plates used in fuel tanks. They have a dome on the

back

side to cover where the bolt comes through and a Oring on the flat side to
seal it. I would still cover it with Proseal just to be sure it did not

leak.

You have to be careful not to use a bolt to long as it will break through
the dome. I don't know a Part Number or a Source to get these but I did

see

a bag of 100 get sold on ebay really cheap.
Jim

** To unsubscribe, send e-mail to list-server@dcsol.com with **
** UNSUBSCRIBE MURPHY-REBEL in the message body on a line by itself **
** Archives located at http://rebel:builder@www.dcsol.com:81/default.htm **
** To contact the list admin, e-mail mike.davis@dcsol.com **

-----------------------------------------------------



** To unsubscribe, send e-mail to list-server@dcsol.com with **
** UNSUBSCRIBE MURPHY-REBEL in the message body on a line by itself **
** Archives located at http://rebel:builder@www.dcsol.com:81/default.htm **
** To contact the list admin, e-mail mike.davis@dcsol.com **




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Just wondering if there was any reason that stainless steel nut plates would
be preferable over cadmium.

Mike

On 12/5/2001 7:28 AM, KBOLIVER@ADELPHIA.NET wrote to MURPHY-REBEL:

-> Try the attached, just click on it
->
->
-> Keith Oliver
-> Elite #654 TD
-> N654ME (reserved)
-> Farmingdale, Maine
->
->
->
->
-> -----Original Message-----
-> From: murphy-rebel@dcsol.com [mailto:murphy-rebel@dcsol.com]On Behalf Of
-> Drew and Jan
-> Sent: Tuesday, December 04, 2001 11:24 AM
-> To: murphy-rebel@dcsol.com
-> Subject: Re: Fuel Tank Nutplates+ebay
->
->
-> Jim how do you search ebay for stuff like this? All I seem to be able to
-> find is art,toys and other junk.
-> Thanks drew dalgleish
->
-> At 09:58 PM 12/3/2001 EST, you wrote:
-> >There are special Nut Plates used in fuel tanks. They have a dome on the
-> back
-> >side to cover where the bolt comes through and a Oring on the flat side to
-> >seal it. I would still cover it with Proseal just to be sure it did not
-> leak.
-> > You have to be careful not to use a bolt to long as it will break through
-> >the dome. I don't know a Part Number or a Source to get these but I did
-> see
-> >a bag of 100 get sold on ebay really cheap.
-> >Jim
-> >
-> >** To unsubscribe, send e-mail to list-server@dcsol.com with **
-> >** UNSUBSCRIBE MURPHY-REBEL in the message body on a line by itself **
-> >** Archives located at http://rebel:builder@www.dcsol.com:81/default.htm **
-> >** To contact the list admin, e-mail mike.davis@dcsol.com **
-> >
-> >
-> >
-> -----------------------------------------------------
->
->
->
-> ** To unsubscribe, send e-mail to list-server@dcsol.com with **
-> ** UNSUBSCRIBE MURPHY-REBEL in the message body on a line by itself **
-> ** Archives located at http://rebel:builder@www.dcsol.com:81/default.htm **
-> ** To contact the list admin, e-mail mike.davis@dcsol.com **
->





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Mike, if that was directed at me, no reason other than that is what the
"beefy" one lug anchors that I have are made out of. I also have thousands
of one lug anchors with the nytrol insert, but they are worth about double+
$'s and don't have as deep of a thread body on them. I felt the S.S. ones I
had offered a longer thread, wouldn't rust, are sturdier than most
available, etc. and being all metal easier to prep for Proseal than the ones
with the nytrol on them. No other reasons!!

Wayne

----- Original Message -----
From: <mike.davis@dcsol.com>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, December 05, 2001 11:29 AM
Subject: RE: Fuel Tank Nutplates+ebay

Just wondering if there was any reason that stainless steel nut plates

would

be preferable over cadmium.

Mike

On 12/5/2001 7:28 AM, KBOLIVER@ADELPHIA.NET wrote to MURPHY-REBEL:

-> Try the attached, just click on it
->
->
-> Keith Oliver
-> Elite #654 TD
-> N654ME (reserved)
-> Farmingdale, Maine
->
->

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Thanks Wayne, I'm obviously no where near needing these yet, but when I went
looking for other sources I wasn't able to find any in stainless. Just
trying to figure out whether I wanted to go ahead and buy enough for my
wings from you now.

Mike

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, December 05, 2001 9:49 AM
Subject: Re: Fuel Tank Nutplates+ebay

Mike, if that was directed at me, no reason other than that is what the
"beefy" one lug anchors that I have are made out of. I also have thousands
of one lug anchors with the nytrol insert, but they are worth about

double+

$'s and don't have as deep of a thread body on them. I felt the S.S. ones

I

had offered a longer thread, wouldn't rust, are sturdier than most
available, etc. and being all metal easier to prep for Proseal than the

ones

with the nytrol on them. No other reasons!!

Wayne

----- Original Message -----
From: <mike.davis@dcsol.com>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, December 05, 2001 11:29 AM
Subject: RE: Fuel Tank Nutplates+ebay

Just wondering if there was any reason that stainless steel nut plates

would

be preferable over cadmium.

Mike

On 12/5/2001 7:28 AM, KBOLIVER@ADELPHIA.NET wrote to MURPHY-REBEL:

-> Try the attached, just click on it
->
->
-> Keith Oliver
-> Elite #654 TD
-> N654ME (reserved)
-> Farmingdale, Maine
->
->

** To unsubscribe, send e-mail to list-server@dcsol.com with

**

** UNSUBSCRIBE MURPHY-REBEL in the message body on a line by itself

**

** Archives located at http://rebel:builder@www.dcsol.com:81/default.htm

**

** To contact the list admin, e-mail mike.davis@dcsol.com

**




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------