The Murphy Builders Site

Hi all,

Just finished my SR vertical stabilizer. The manual
doesn't mention installing the fiberglass tip fairing
now? Why? I have mated the rudder to the fin to check
for fit...so it seems like a good time to install it!

Any other SR builders have any thoughts?

-Jason

=====
________________________________________________

Jason Beall
Super Rebel No. 131
Aberdeen, Scotland, UK
super_rebel131@yahoo.com

__________________________________________________
Do You Yahoo!?
Listen to your Yahoo! Mail messages from any phone.
http://phone.yahoo.com



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

If you have the rudder installed, then I can't see any reason not to install
the tip now.. You'll want to have the rudder installed so that you can match
the top of the fairing with the top of the rudder..

Dave
#057SR


Jason Beall wrote:

*-------------------------------------------------------------------------*
The list archives are located at:
http://www.dcsol.com:81/public/default.htm
username: rebel password: builder
*-------------------------------------------------------------------------*
Hi all,

Just finished my SR vertical stabilizer. The manual
doesn't mention installing the fiberglass tip fairing
now? Why? I have mated the rudder to the fin to check
for fit...so it seems like a good time to install it!

Any other SR builders have any thoughts?

-Jason

=====
________________________________________________

Jason Beall
Super Rebel No. 131
Aberdeen, Scotland, UK
super_rebel131@yahoo.com

__________________________________________________
Do You Yahoo!?
Listen to your Yahoo! Mail messages from any phone.
http://phone.yahoo.com
*-------------------------------------------------------------------------*
You have received this message because you have subscribed to the
murphy-rebel mailing list.
To unsubscribe from this list, send an e-mail to: list-server@dcsol.com
with "unsubscribe murphy-rebel" in the body of the message.
For assistance contact mike.davis@dcsol.com
*-------------------------------------------------------------------------*

--
David Qualley
As Built Floor Plans Canada
3555 Pearkes Place
Port Coquitlam, BC, V3B 5E4
tel 604.944.3392
fax 604.831.7401
http://AsBuiltFloorPlans.COM





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Sure, mount it now if you want. Good idea to mate the rudder to the fin for
fitting the tip fairing. By the way, the manual never tells you to install
the fairings. There are no instructions for this. You're on your own. A
dremel tool with a cutting wheel works very nice. Take your time fitting,
cutting, refitting, etc. and it will turn out fine.

Mike Kimball
SR#044

-----Original Message-----
From: murphy-rebel@dcsol.com [mailto:murphy-rebel@dcsol.com]On Behalf Of
Jason Beall
Sent: Friday, September 28, 2001 8:52 AM
To: murphy-rebel@dcsol.com
Subject: SR vertical fin fairing...why not now?


*-------------------------------------------------------------------------*
The list archives are located at:
http://www.dcsol.com:81/public/default.htm
username: rebel password: builder
*-------------------------------------------------------------------------*
Hi all,

Just finished my SR vertical stabilizer. The manual
doesn't mention installing the fiberglass tip fairing
now? Why? I have mated the rudder to the fin to check
for fit...so it seems like a good time to install it!

Any other SR builders have any thoughts?

-Jason

=====
________________________________________________

Jason Beall
Super Rebel No. 131
Aberdeen, Scotland, UK
super_rebel131@yahoo.com

__________________________________________________
Do You Yahoo!?
Listen to your Yahoo! Mail messages from any phone.
http://phone.yahoo.com
*-------------------------------------------------------------------------*
You have received this message because you have subscribed to the
murphy-rebel mailing list.
To unsubscribe from this list, send an e-mail to: list-server@dcsol.com
with "unsubscribe murphy-rebel" in the body of the message.
For assistance contact mike.davis@dcsol.com
*-------------------------------------------------------------------------*





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------