The Murphy Builders Site

In a message dated 9/4/01 9:00:04 PM Central Daylight Time,
Walter.Klatt@home.com writes:

, I do have a cheap simple prop balancer that I use that
can balance your prop, spinner and all hardware.

WALTER
Where did you get the prop balancer? Do you balance it on the engine, or on
the shop bench?
Phil&Lisa Smith #460R N414D

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

It's called a Propmaster. Here is the site:
http://www.ulflight.com/
You balance the prop first, then the spinner and prop, and all your hardware. This is not on the airplane, so if your flywheel or crank is out, then you still need the expensive prop shop dynamic balancing. It works fine for small wooden or composite props, but not for the big metal ones. You can talk to the guy on email, and he can tell you what you need. Anyway, it worked fine for me.

-----Original Message-----
From: murphy-rebel@dcsol.com [mailto:murphy-rebel@dcsol.com]On Behalf Of LisaFly99@aol.com
Sent: September 4, 2001 8:21 PM
To: murphy-rebel@dcsol.com
Subject: Re: Prop balancer


In a message dated 9/4/01 9:00:04 PM Central Daylight Time,
Walter.Klatt@home.com writes:

, I do have a cheap simple prop balancer that I use that
can balance your prop, spinner and all hardware.

WALTER
Where did you get the prop balancer? Do you balance it on the engine, or on
the shop bench?
Phil&Lisa Smith #460R N414D