The Murphy Builders Site

For those with electric elevator trim. How long of a pigtail of wire out of
the elevator have you been using? Did you splice back in the
tail/stabilizer, or long enough to reach from inside baggage compartment?

Thanks,
Scott
SR#174




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Scott, the best place to splice is right on the "deck" of the FUS-30 pie
plate using either a terminal strip or a multiwire male/female plug
assembly. This allows for easy removal and installation of the entire left
stab/elevator assembly, as a unit, without having to cut any wires. SORRY
typed that for a Rebel and then realized you have an SR. I would think that
there is a place under the cantilever stab that a terminal strip, or plug,
would work on the SR also! If you put it in the tail baggage area you will
be cutting and splicing wires to remove the tailfeathers, instead of just
unplugging.

Regards,
Wayne G. O'Shea
www.irishfield.on.ca

----- Original Message -----
From: "Scott & Leere' Aldrich" <flynski@peoplepc.com>
To: <murphy-rebel@dcsol.com>
Sent: Monday, August 27, 2001 10:48 AM
Subject: Elevator Electric trim wire


*-------------------------------------------------------------------------*

The list archives are located at:
http://www.dcsol.com:81/public/default.htm
username: rebel password: builder

*-------------------------------------------------------------------------*

For those with electric elevator trim. How long of a pigtail of wire out

of

the elevator have you been using? Did you splice back in the
tail/stabilizer, or long enough to reach from inside baggage compartment?

Thanks,
Scott
SR#174

*-------------------------------------------------------------------------*

You have received this message because you have subscribed to the
murphy-rebel mailing list.
To unsubscribe from this list, send an e-mail to: list-server@dcsol.com
with "unsubscribe murphy-rebel" in the body of the message.
For assistance contact mike.davis@dcsol.com

*-------------------------------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Scott,
I did a 5 pin connector under the horizontal stab and sealed the wires with
goop. The elevator lead is about 14" from the hinge to plug.
Al
SR026
----- Original Message -----
From: "Scott & Leere' Aldrich" <flynski@peoplepc.com>
To: <murphy-rebel@dcsol.com>
Sent: Monday, August 27, 2001 7:48 AM
Subject: Elevator Electric trim wire


*-------------------------------------------------------------------------*

The list archives are located at:
http://www.dcsol.com:81/public/default.htm
username: rebel password: builder

*-------------------------------------------------------------------------*

For those with electric elevator trim. How long of a pigtail of wire out

of

the elevator have you been using? Did you splice back in the
tail/stabilizer, or long enough to reach from inside baggage compartment?

Thanks,
Scott
SR#174

*-------------------------------------------------------------------------*

You have received this message because you have subscribed to the
murphy-rebel mailing list.
To unsubscribe from this list, send an e-mail to: list-server@dcsol.com
with "unsubscribe murphy-rebel" in the body of the message.
For assistance contact mike.davis@dcsol.com

*-------------------------------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------