I have uploaded 3 pictures of my tail wheel puller to the List site under
Rebel - Miscellaneous. This puller will work on any tailwheel with an axle
that the tubes can slip over the nuts, or it also works on the Murphy
tailwheel by slipping a bar, or screwdriver (I use an old huge phillips
screw driver that's good for nothing else), through the hollow axle and the
pullers holder tubes. It also works on Cessna nose wheels and many other
aircraft thanks to its fairly large holder tubes that are big enough to go
around the Scott 3200 axle nuts.
Very easy to make from some scrap 4130 tube, mild tube or what ever you have
around the shop!
Wayne
----- Original Message -----
From: "Wayne G. O'Shea" <
oifa@irishfield.on.ca>
To: <
murphy-rebel@dcsol.com>
Sent: Wednesday, July 25, 2001 6:22 PM
Subject: Re: tail handle
*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*
I'm re-reading Peter's e-mail and I think the tail pull handles he is
talking about are handles right on the tail cone for moving the plane
around
when turning it around by hand, etc.. I took the email at first to be a
tail
wheel puller for hooking onto your tailwheel and pulling backwards into
the
hanger etc. I will take some shots of my tail wheel puller shortly and
upload to the site tonight.
Peter please clarify if my second assumption is correct, that you meant
handles right on the tail!
Regards,
Wayne G. O'Shea
www.irishfield.on.ca
----- Original Message -----
From: "Mike Kimball" <
agt@mosquitonet.com>
To: <
murphy-rebel@dcsol.com>
Sent: Wednesday, July 25, 2001 2:11 PM
Subject: RE: tail handle
*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*
Tail pull handle pics for me too? Maybe it'd be easier to just upload
them
*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*
G'day Wayne
I would appreciate it if you would also send me the pics of your tail
handle.
Regards
Ian Donaldson
*-------------------------------------------------------------------------*
You have received this message because you have subscribed to the
murphy-rebel mailing list.
To unsubscribe from this list, send an e-mail to:
list-server@dcsol.com
with "unsubscribe murphy-rebel" in the body of the message.
For assistance contact
mike.davis@dcsol.com
*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*
You have received this message because you have subscribed to the
murphy-rebel mailing list.
To unsubscribe from this list, send an e-mail to:
list-server@dcsol.com
with "unsubscribe murphy-rebel" in the body of the message.
For assistance contact
mike.davis@dcsol.com
*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*
You have received this message because you have subscribed to the
murphy-rebel mailing list.
To unsubscribe from this list, send an e-mail to:
list-server@dcsol.com
with "unsubscribe murphy-rebel" in the body of the message.
For assistance contact
mike.davis@dcsol.com
*-------------------------------------------------------------------------*
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------