The Murphy Builders Site

Posted: **Fri Feb 17, 2012 4:21 pm**

Received: from albedo.net (ppp154.albedo.net [206.51.22.173]) by
juliet.albedo.net (8.8.3/8.6.9) with ESMTP id WAA28182 for
<murphy-rebel@dcsol.com>; Wed, 22 Jul 1998 22:29:30 -0400
Message-ID: <35B69F2D.679AB553@albedo.net>
Date: Wed, 22 Jul 1998 22:25:49 -0400
From: klehman@albedo.net
X-Mailer: Mozilla 4.05 [en] (Win95; I)
MIME-Version: 1.0
To: " (Murphy Rebel)" <murphy-rebel@dcsol.com>
Subject: Re: .020 corners
References: <b1e3d6a9.35b65df1@aol.com>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

You guys are confusing me a bit here. MAM indicated to me that new corner
wraps
for the Rebel were .032" thick, part number FUS-452. (I have the Rebel not
the
Elite or SR) Can anyone confirm whether they are really .025 (as Bobp
mentioned)
or .032? Also I presume all 4 corner wraps behind the firewall are
upgraded,
although someone told me he thought it was only the bottom two.

Dan - Do register for the MAM builder's support page. It's not terribly
active
but definately helpful. Denis is making a good effort share information
anyway
he can.

thanks
Ken

MMoreho699@aol.com wrote:

Thanks, Bobp!
You were right with the .020 tapered corners. I'm thinking of making up

some

out of .032 or somehow reinforcing the .020's. I've just done one so far.

Posted: **Fri Feb 17, 2012 4:21 pm**

Received: from [204.191.146.201] (helo=ts73-10.tor.istar.ca)
by mail2.toronto.istar.net with smtp (Exim 1.92 #2)
for murphy-rebel@dcsol.com
id 0z0657-0005Bd-00; Sat, 25 Jul 1998 11:17:58 -0400
X-Sender: crs1188@inforamp.net
X-Mailer: Windows Eudora Light Version 1.5.2
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: <murphy-rebel@dcsol.com> (Murphy Rebel)
From: Bob Patterson <bob.patterson@canrem.com>
Subject: Re: .020 corners
Message-Id: <E0z0657-0005Bd-00@mail2.toronto.istar.net>
Date: Sat, 25 Jul 1998 11:17:58 -0400

Sorry Ken !!

I may be a little behind the times. When I upgraded MY corner wraps,
the new ones were FUS-70 (I think !!), and were .025. It may well be that
there has been yet ANOTHER upgrade, and this FUS-452 is the latest, at
..032. Whatever the case, anyone who has thinner corner wraps, and hasn't
yet installed them, would be well advised to order the latest version.

.....bobp

(FUS-452 sounds like it MIGHT be an ELITE part no. ....)

------------------------------------orig.-----------------------------------
-
At 10:25 PM 7/22/98 -0400, you wrote:

You guys are confusing me a bit here. MAM indicated to me that new corner

wraps

for the Rebel were .032" thick, part number FUS-452. (I have the Rebel not

the

Elite or SR) Can anyone confirm whether they are really .025 (as Bobp

mentioned)

or .032? Also I presume all 4 corner wraps behind the firewall are

upgraded,

although someone told me he thought it was only the bottom two.

Dan - Do register for the MAM builder's support page. It's not terribly

active

but definately helpful. Denis is making a good effort share information

anyway

he can.

thanks
Ken

MMoreho699@aol.com wrote:
Thanks, Bobp!
You were right with the .020 tapered corners. I'm thinking of making up

some

out of .032 or somehow reinforcing the .020's. I've just done one so far.

Posted: **Fri Feb 17, 2012 4:21 pm**

Received: from chk1a10.dial.uniserve.ca [204.244.143.105]
by pop.uniserve.com with smtp (Exim 1.82 #4)
id 0z0wTT-0005AZ-00; Mon, 27 Jul 1998 16:14:35 -0700
Message-Id: <2.2.16.19980727160705.37e7609c@pop.uniserve.com>
X-Sender: murtech@pop.uniserve.com
X-Mailer: Windows Eudora Pro Version 2.2 (16)
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: <murphy-rebel@dcsol.com> (Murphy Rebel)
From: Murphy Aircraft Tech Department <murtech@murphyair.com >
Subject: Re: .020 corners
Date: Mon, 27 Jul 1998 16:14:35 -0700

At 05:47 PM 7/22/98 EDT, you wrote:

Thanks, Bobp!

You were right with the .020 tapered corners. I'm thinking of making up

some

out of .032 or somehow reinforcing the .020's. I've just done one so far.

Thanks also for your ideas on engines. Another possibilty for me is to get

a

used 912 and rebuild it. Jeff from Lockwood mentioned that the 100hp 912s

is

coming out which may make more used 912 available.

Take care,
Dan
R280

..>
Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Posted: **Fri Feb 17, 2012 4:21 pm**

Received: from chk1a10.dial.uniserve.ca [204.244.143.105]
by pop.uniserve.com with smtp (Exim 1.82 #4)
id 0z0wTU-0005AZ-00; Mon, 27 Jul 1998 16:14:37 -0700
Message-Id: <2.2.16.19980727160707.37e7636a@pop.uniserve.com>
X-Sender: murtech@pop.uniserve.com
X-Mailer: Windows Eudora Pro Version 2.2 (16)
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: <murphy-rebel@dcsol.com> (Murphy Rebel)
From: Murphy Aircraft Tech Department <murtech@murphyair.com >
Subject: Re: .020 corners
Date: Mon, 27 Jul 1998 16:14:37 -0700

At 10:25 PM 7/22/98 -0400, you wrote:

You guys are confusing me a bit here. MAM indicated to me that new corner

wraps

for the Rebel were .032" thick, part number FUS-452. (I have the Rebel not

the

Elite or SR) Can anyone confirm whether they are really .025 (as Bobp

mentioned)

or .032? Also I presume all 4 corner wraps behind the firewall are

upgraded,

although someone told me he thought it was only the bottom two.

Dan - Do register for the MAM builder's support page. It's not terribly

active

but definately helpful. Denis is making a good effort share information

anyway

he can.

thanks
Ken

MMoreho699@aol.com wrote:
Thanks, Bobp!
You were right with the .020 tapered corners. I'm thinking of making up

some

out of .032 or somehow reinforcing the .020's. I've just done one so far.

Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Posted: **Fri Feb 17, 2012 4:21 pm**

Received: from chk1a10.dial.uniserve.ca [204.244.143.105]
by pop.uniserve.com with smtp (Exim 1.82 #4)
id 0z0wem-0006Qv-00; Mon, 27 Jul 1998 16:26:17 -0700
Message-Id: <2.2.16.19980727161847.3a2fcbba@pop.uniserve.com>
X-Sender: mursales@pop.uniserve.com
X-Mailer: Windows Eudora Pro Version 2.2 (16)
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: <murphy-rebel@dcsol.com> (Murphy Rebel)
From: Murphy Sales Department <mursales@murphyair.com>
Subject: Re: .020 corners
Date: Mon, 27 Jul 1998 16:26:17 -0700

Hi Folks,

Thought I'd clear up the confusion around the "corner wraps". Originally the
BOTTOM corner wraps were made from .020.They were then upgraded to .032 and
the part number is FUS-452. It is recommended that if you have the older
ones that they are replaced PARTICULARLY if you have choosen the 0-320
powerplant.

To all of you that will be at this years Oshkosh Dinner, I hope you have a
wonderful evening and I'll miss you all!

Sunny Skies,
Colleen

Murphy Aircraft Mfg. Ltd
Manufacturers of the Renegade, Renegade Spirit, Rebel,
Maverick, Rebel Elite & the 4/6 place Super Rebel
mursales@murphyair.com
Web Site http://www.murphyair.com
See our SR and Elite on display at Oshosh Fly-In
in Oshkosh, WI July 29-August 4th

Posted: **Fri Feb 17, 2012 4:21 pm**

Received: from [205.163.8.199] (drk.cts.com [205.163.8.199]) by mh2.cts.com
(8.8.7/8.8.5) with ESMTP id VAA20540 for <murphy-rebel@dcsol.com>; Mon, 27
Jul 1998 21:17:14 -0700 (PDT)
X-Sender: drk@crash.cts.com
Message-Id: <v04003a01b1e29045dc25@[205.163.8.199]>
In-Reply-To: <2.2.16.19980727161847.3a2fcbba@pop.uniserve.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Date: Mon, 27 Jul 1998 21:16:37 +0100
To: <murphy-rebel@dcsol.com> (Murphy Rebel)
From: Dave Klimas <drk@cts.com>
Subject: Re: .020 corners

Hi Colleen,

Thanks for the clarification on the thickness, but if FUS-452 is the
upgraded part number, how many are required and what part(s) does it
replace?
I'm looking at the fuselage assembly, Figure 1.
Is it item (4) FUS-33, item (47) FUS-70, or item (37) FUS-10?

Dave and Bert Klimas
Rebel 472
Ramona, California

Hi Folks,

Thought I'd clear up the confusion around the "corner wraps". Originally

the

BOTTOM corner wraps were made from .020.They were then upgraded to .032 and
the part number is FUS-452. It is recommended that if you have the older
ones that they are replaced PARTICULARLY if you have choosen the 0-320
powerplant.

To all of you that will be at this years Oshkosh Dinner, I hope you have a
wonderful evening and I'll miss you all!

Sunny Skies,
Colleen

Murphy Aircraft Mfg. Ltd
Manufacturers of the Renegade, Renegade Spirit, Rebel,
Maverick, Rebel Elite & the 4/6 place Super Rebel
mursales@murphyair.com
Web Site http://www.murphyair.com
See our SR and Elite on display at Oshosh Fly-In
in Oshkosh, WI July 29-August 4th

.

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Fri Feb 17, 2012 4:21 pm**

Received: from MMoreho699@aol.com
by imo26.mx.aol.com (IMOv14_b1.1) id EBIDa04521
for <murphy-rebel@dcsol.com>; Tue, 28 Jul 1998 11:30:44 -0400 (EDT)
From: <MMoreho699@aol.com>
Message-ID: <1732eb35.35bdeea5@aol.com>
Date: Tue, 28 Jul 1998 11:30:44 EDT
To: murphy-rebel@dcsol.com
Mime-Version: 1.0
Subject: Re: .020 corners
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
X-Mailer: AOL for Macintosh sub 189

How much are these for a set? Shipping?

Thanks,
Dan Morehouse
Bellingham

Posted: **Fri Feb 17, 2012 4:21 pm**

Received: from chk1a31.dial.uniserve.ca [204.244.143.126]
by pop.uniserve.com with smtp (Exim 1.82 #4)
id 0z1JPI-00073O-00; Tue, 28 Jul 1998 16:43:49 -0700
Message-Id: <2.2.16.19980728164409.3327d5fc@pop.uniserve.com>
X-Sender: murtech@pop.uniserve.com
X-Mailer: Windows Eudora Pro Version 2.2 (16)
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: <murphy-rebel@dcsol.com> (Murphy Rebel)
From: Murphy Aircraft Tech Department <murtech@murphyair.com >
Subject: Re: .020 corners
Date: Tue, 28 Jul 1998 16:43:49 -0700

At 09:16 PM 7/27/98 +0100, you wrote:

Hi Colleen,

Thanks for the clarification on the thickness, but if FUS-452 is the
upgraded part number, how many are required and what part(s) does it
replace?
I'm looking at the fuselage assembly, Figure 1.
Is it item (4) FUS-33, item (47) FUS-70, or item (37) FUS-10?

Dave and Bert Klimas
Rebel 472
Ramona, California

Hi ;
The FUS-452 replaces the bottom forward tapered corner wraps (L/G to
firewall), 2 are required.
Regards;
Dennis

Hi Folks,

Thought I'd clear up the confusion around the "corner wraps". Originally

the

BOTTOM corner wraps were made from .020.They were then upgraded to .032

and

the part number is FUS-452. It is recommended that if you have the older
ones that they are replaced PARTICULARLY if you have choosen the 0-320
powerplant.

To all of you that will be at this years Oshkosh Dinner, I hope you have a
wonderful evening and I'll miss you all!

Sunny Skies,
Colleen

Murphy Aircraft Mfg. Ltd
Manufacturers of the Renegade, Renegade Spirit, Rebel,
Maverick, Rebel Elite & the 4/6 place Super Rebel
mursales@murphyair.com
Web Site http://www.murphyair.com
See our SR and Elite on display at Oshosh Fly-In
in Oshkosh, WI July 29-August 4th

Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Posted: **Fri Feb 17, 2012 4:21 pm**

Received: from chk1a30.dial.uniserve.ca [204.244.143.125]
by pop.uniserve.com with smtp (Exim 1.82 #4)
id 0z1ZHC-00034P-00; Wed, 29 Jul 1998 09:40:30 -0700
Message-Id: <2.2.16.19980729094049.47b7b12c@pop.uniserve.com>
X-Sender: murtech@pop.uniserve.com
X-Mailer: Windows Eudora Pro Version 2.2 (16)
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: <murphy-rebel@dcsol.com> (Murphy Rebel)
From: Murphy Aircraft Tech Department <murtech@murphyair.com >
Subject: Re: .020 corners
Date: Wed, 29 Jul 1998 09:40:30 -0700

At 11:30 AM 7/28/98 EDT, you wrote:

How much are these for a set? Shipping?

Thanks,
Dan Morehouse
Bellingham

Dan;

Part numbers and quantities please.

Dennis
Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Posted: **Fri Feb 17, 2012 4:21 pm**

Received: from chk1a22.dial.uniserve.ca [204.244.143.117]
by pop.uniserve.com with smtp (Exim 1.82 #4)
id 0z21WJ-0004JM-00; Thu, 30 Jul 1998 15:50:00 -0700
Message-Id: <2.2.16.19980730155019.2af7f5a2@pop.uniserve.com>
X-Sender: murtech@pop.uniserve.com
X-Mailer: Windows Eudora Pro Version 2.2 (16)
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: <murphy-rebel@dcsol.com> (Murphy Rebel)
From: Murphy Aircraft Tech Department <murtech@murphyair.com >
Subject: Re: .020 corners
Date: Thu, 30 Jul 1998 15:50:00 -0700

At 09:40 AM 7/29/98 -0700, you wrote:

At 11:30 AM 7/28/98 EDT, you wrote:
How much are these for a set? Shipping?

Thanks,
Dan Morehouse
Bellingham

Dan;
Part numbers and quantities please.

Dennis
Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Posted: **Fri Feb 17, 2012 4:21 pm**

Received: from d.james (ba2p0.planeteer.com [204.50.144.65])
by toronto.planeteer.com (8.8.7/8.8.7) with ESMTP id WAA16824
for <murphy-rebel@dcsol.com>; Thu, 30 Jul 1998 22:11:19 -0400 (EDT)
Message-ID: <35C1287B.734BCFC9@planeteer.com>
Date: Thu, 30 Jul 1998 22:14:19 -0400
From: David James <dmjames@planeteer.com>
X-Mailer: Mozilla 4.01 [en] (Win95; I)
MIME-Version: 1.0
To: " (Murphy Rebel)" <murphy-rebel@dcsol.com>
Subject: Re: .020 corners
X-Priority: 3 (Normal)
X-Corel-MessageType: EMail
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Why do you keep repeating the messages to the Murphy Group without
adding any new information? It is just a waste of my time!

David James
Rebel 228

At 09:40 AM 7/29/98 -0700, you wrote:

At 11:30 AM 7/28/98 EDT, you wrote:
How much are these for a set? Shipping?

Thanks,
Dan Morehouse
Bellingham

Dan;
Part numbers and quantities please.

Dennis
Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Posted: **Fri Feb 17, 2012 4:21 pm**

Received: from chk1a31.dial.uniserve.ca [204.244.143.126]
by pop.uniserve.com with smtp (Exim 1.82 #4)
id 0z2NCQ-0005ZV-00; Fri, 31 Jul 1998 14:58:55 -0700
Message-Id: <2.2.16.19980731145926.424fddce@pop.uniserve.com>
X-Sender: murtech@pop.uniserve.com
X-Mailer: Windows Eudora Pro Version 2.2 (16)
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: <murphy-rebel@dcsol.com> (Murphy Rebel)
From: Murphy Aircraft Tech Department <murtech@murphyair.com >
Subject: Re: .020 corners
Date: Fri, 31 Jul 1998 14:58:55 -0700

At 03:50 PM 7/30/98 -0700, you wrote:

At 09:40 AM 7/29/98 -0700, you wrote:
At 11:30 AM 7/28/98 EDT, you wrote:
How much are these for a set? Shipping?

Thanks,
Dan Morehouse
Bellingham

Dan;
Part numbers and quantities please.

Dennis
Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Posted: **Fri Feb 17, 2012 4:21 pm**

Received: from chk1a31.dial.uniserve.ca [204.244.143.126]
by pop.uniserve.com with smtp (Exim 1.82 #4)
id 0z2NCS-0005ZV-00; Fri, 31 Jul 1998 14:58:57 -0700
Message-Id: <2.2.16.19980731145927.424fdba0@pop.uniserve.com>
X-Sender: murtech@pop.uniserve.com
X-Mailer: Windows Eudora Pro Version 2.2 (16)
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: <murphy-rebel@dcsol.com> (Murphy Rebel)
From: Murphy Aircraft Tech Department <murtech@murphyair.com >
Subject: Re: .020 corners
Date: Fri, 31 Jul 1998 14:58:57 -0700

At 03:49 PM 7/30/98 -0700, you wrote:

At 09:40 AM 7/29/98 -0700, you wrote:
At 04:43 PM 7/28/98 -0700, you wrote:
At 09:16 PM 7/27/98 +0100, you wrote: Hi ;
The FUS-452 replaces the bottom forward tapered corner wraps (L/G to
firewall), 2 are required.
Regards;
Dennis
Thought I answered this yesterday... obviously my e-mail skills are

lacking,

just look at the message above.
Dennis

Originally the

and

older

have a

Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Posted: **Fri Feb 17, 2012 4:21 pm**

Received: from chk1a23.dial.uniserve.ca [204.244.143.118]
by pop.uniserve.com with smtp (Exim 1.82 #4)
id 0z3njE-0001PW-00; Tue, 4 Aug 1998 13:30:41 -0700
Message-Id: <2.2.16.19980804133448.33effd92@pop.uniserve.com>
X-Sender: mursales@pop.uniserve.com
X-Mailer: Windows Eudora Pro Version 2.2 (16)
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: <murphy-rebel@dcsol.com> (Murphy Rebel)
From: Murphy Sales Department <mursales@murphyair.com>
Subject: Re: .020 corners
Date: Tue, 4 Aug 1998 13:30:41 -0700

Hi Folks,

The FUS-452 that replaces part # FUS-10 are $29.00 US each. Two only are
required. Shipping costs vary depending on carrier choosen.

I agree with David in repeating these messages. Quite frankly, we only check
this site out if we have some spare time on our hands. Technical, Sales and
the Shipping departments all have their own mail boxes, which of course have
priority. If SPECIFICS are required by Murphy Aircraft please e-mail the
appropriate address and your questions will be answered in a timely fashion.

Sunny Skies,
Colleen

At 10:14 PM 7/30/98 -0400, you wrote:

Why do you keep repeating the messages to the Murphy Group without
adding any new information? It is just a waste of my time!

David James
Rebel 228

At 09:40 AM 7/29/98 -0700, you wrote:
At 11:30 AM 7/28/98 EDT, you wrote:
How much are these for a set? Shipping?

Thanks,
Dan Morehouse
Bellingham

Dan;
Part numbers and quantities please.

Dennis
Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Murphy Aircraft Mfg. Ltd
Manufacturers of the Renegade, Renegade Spirit, Rebel,
Maverick, Rebel Elite & the 4/6 place Super Rebel
mursales@murphyair.com
Web Site http://www.murphyair.com
See our SR and Elite on display at Oshosh Fly-In
in Oshkosh, WI July 29-August 4th

Posted: **Fri Feb 17, 2012 4:21 pm**

Received: from chk1a22.dial.uniserve.ca [204.244.143.117]
by pop.uniserve.com with smtp (Exim 1.82 #4)
id 0z4AKU-0002L8-00; Wed, 5 Aug 1998 13:38:39 -0700
Message-Id: <2.2.16.19980805133849.2bcfebf8@pop.uniserve.com>
X-Sender: murtech@pop.uniserve.com
X-Mailer: Windows Eudora Pro Version 2.2 (16)
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: <murphy-rebel@dcsol.com> (Murphy Rebel)
From: Murphy Aircraft Tech Department <murtech@murphyair.com >
Subject: Re: .020 corners
Date: Wed, 5 Aug 1998 13:38:39 -0700

At 01:30 PM 8/4/98 -0700, you wrote:

Hi Folks,

The FUS-452 that replaces part # FUS-10 are $29.00 US each. Two only are
required. Shipping costs vary depending on carrier choosen.

I agree with David in repeating these messages. Quite frankly, we only

check

this site out if we have some spare time on our hands. Technical, Sales and
the Shipping departments all have their own mail boxes, which of course

have

priority. If SPECIFICS are required by Murphy Aircraft please e-mail the
appropriate address and your questions will be answered in a timely

fashion.

Sunny Skies,
Colleen

At 10:14 PM 7/30/98 -0400, you wrote:
Why do you keep repeating the messages to the Murphy Group without
adding any new information? It is just a waste of my time!

David James
Rebel 228

At 09:40 AM 7/29/98 -0700, you wrote:
At 11:30 AM 7/28/98 EDT, you wrote: Part numbers and quantities please.

Dennis
Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com

Murphy Aircraft Mfg. Ltd
Manufacturers of the Renegade, Renegade Spirit, Rebel,
Maverick, Rebel Elite & the 4/6 place Super Rebel
mursales@murphyair.com
Web Site http://www.murphyair.com
See our SR and Elite on display at Oshosh Fly-In
in Oshkosh, WI July 29-August 4th

Murphy Aircraft Mfg. Ltd.
Ph: 1-604-792-5855
Fax: 1-604-792-7006
e-mail: murtech@murphyir.com
Web Site: http://www.murphyair.com