dimpling fuselage root rib
Posted: Fri Feb 17, 2012 4:21 pm
Received: from MMoreho699@aol.com
by imo20.mx.aol.com (IMOv14_b1.1) id WWHSa19316;
Tue, 21 Jul 1998 02:13:43 -0400 (EDT)
From: <MMoreho699@aol.com>
Message-ID: <3fae5bd4.35b43199@aol.com>
Date: Tue, 21 Jul 1998 02:13:43 EDT
To: murtech@murphyair.com, murphy-rebel@dcsol.com
Mime-Version: 1.0
Subject: dimpling fuselage root rib
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
X-Mailer: AOL for Macintosh sub 161
Hello!
My rebel instruction says to dimple the root rib and roof. What about roof
above the side panel rearward from the root rib, where there is an angle
reinforcement under the roof from bulkhead F to A?
Thanks,
Dan
R280
.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
by imo20.mx.aol.com (IMOv14_b1.1) id WWHSa19316;
Tue, 21 Jul 1998 02:13:43 -0400 (EDT)
From: <MMoreho699@aol.com>
Message-ID: <3fae5bd4.35b43199@aol.com>
Date: Tue, 21 Jul 1998 02:13:43 EDT
To: murtech@murphyair.com, murphy-rebel@dcsol.com
Mime-Version: 1.0
Subject: dimpling fuselage root rib
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
X-Mailer: AOL for Macintosh sub 161
Hello!
My rebel instruction says to dimple the root rib and roof. What about roof
above the side panel rearward from the root rib, where there is an angle
reinforcement under the roof from bulkhead F to A?
Thanks,
Dan
R280
.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------