The Murphy Builders Site

Posted: **Fri Feb 17, 2012 8:56 pm**

Ian.....G'day, Rick here

I used a small 1/4" drive ratchet and socket with a ring spanner at the other end......worked OK
for me.
I just fitted all 4 Flaperons on my own...no problem

Happy building

541R...(flying :-)

Posted: **Fri Feb 17, 2012 8:56 pm**

G'day Rick

Thanks for your tips. I guess that I should get a 1/4" sosket set.

How is your Rebel flying?

Regards

Ian
-----

Posted: **Fri Feb 17, 2012 8:56 pm**

G'day Ian !

The 1/4" drive socket wrench actually fits through the bolt inspection hole (my other 1/4 " wrench doesn't !)

Only done 50 high "hops" down the runway as yet.....(engine wasn't 100% anyway)

Planning on the "big one" this coming Monday morning !!!...let you know how it goes.
Feels GREAT so far !

Rick & Wendy

----- Original Message -----
From: allsure (allsure@iprimus.com.au)
To: murphy-rebel@dcsol.com (murphy-rebel@dcsol.com)
Sent: Friday, 11 May 2001 21:03
Subject: Re: Aileron Bolts

G'day Rick

Thanks for your tips. I guess that I should get a 1/4" sosket set.

How is your Rebel flying?

Regards

Ian
-----