The Murphy Builders Site

Received: from CWS1932@aol.com
by imo14.mx.aol.com (IMOv14_b1.1) id EFOFa13455
for <murphy-rebel@dcsol.com>; Fri, 26 Jun 1998 23:48:29 +2000 (EDT)
From: <CWS1932@aol.com>
Message-ID: <a7cb3846.35946b8e@aol.com>
Date: Fri, 26 Jun 1998 23:48:29 EDT
To: murphy-rebel@dcsol.com
Mime-Version: 1.0
Subject: Elevator wt.
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
X-Mailer: AOL 3.0 for Windows 95 sub 18

My experience with the SR-2500 weights was about the same: hours of building
temorary hinge jigs, adding weights at just the right poit, buying a scale
etc. only to find out that it took about 4 times the supplied weights to
bal.
Murphy answer was that just put in the weights that were supplied and it
would
be enough. The only modifacation I made was to reinforce the weight attach
point with a doubler.

Charlie Starr



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------