IO540 Fuel Pressure
Posted: Fri Feb 17, 2012 8:48 pm
I am in the process of final steps of my engine installation and don't know
where to mount the fuel pressure sender. The fuel servo is a Bendix and the
pressure sender is a is a Mitchell electric type.
There is a plug in the top of the servo just above the fuel inlet does it go
there or does it tee into the fuel line? Also I was thinking that the
pressure is monitored on the input side of the servo and not on the side
going to the distribution spider.
Thanks,
Al Paxhia SR26
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
where to mount the fuel pressure sender. The fuel servo is a Bendix and the
pressure sender is a is a Mitchell electric type.
There is a plug in the top of the servo just above the fuel inlet does it go
there or does it tee into the fuel line? Also I was thinking that the
pressure is monitored on the input side of the servo and not on the side
going to the distribution spider.
Thanks,
Al Paxhia SR26
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------