The Murphy Builders Site

It has occurred to me that I am missing one
important item. I have not put together a wiring
diagram! As a mechanical engineer, this should
be no big deal, but it scares me worse than test
flying a newly rebuilt airplane. Has anyone run
across a simple aircraft wiring diagram on the
net that I can look over for ideas?

I know I need a couple of fuse buses, a converter
to reduce the 28V to 14V for some of the
instruments, solenoids, hmmm. I have some
thinking to do. BTW, one tank has sealed up
tight and the other I just put back together for
the 3rd time. I am getting pretty quick with
proseal. I am leaving for New Zealand so I will
have to test it when I get back.

Scott
hibbs@pacifier.com



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Scott,
Check out Bob Nuckolls and his publication on how to wire your airplane.
His web site is http://www.aeroelectric.com/ also there is a good forum that
can also help. E-mail Address: aeroelectric-list@matronics.com
Al Paxhia, SR26


----- Original Message -----
From: <rebel300r@dcsol.com>
To: <murphy-rebel@dcsol.com>
Sent: Friday, March 02, 2001 10:02 PM
Subject: Wiring Diagram


*-------------------------------------------------------------------------*

The list archives are located at:
http://www.dcsol.com:81/public/default.htm
username: rebel password: builder

*-------------------------------------------------------------------------*

It has occurred to me that I am missing one
important item. I have not put together a wiring
diagram! As a mechanical engineer, this should
be no big deal, but it scares me worse than test
flying a newly rebuilt airplane. Has anyone run
across a simple aircraft wiring diagram on the
net that I can look over for ideas?

I know I need a couple of fuse buses, a converter
to reduce the 28V to 14V for some of the
instruments, solenoids, hmmm. I have some
thinking to do. BTW, one tank has sealed up
tight and the other I just put back together for
the 3rd time. I am getting pretty quick with
proseal. I am leaving for New Zealand so I will
have to test it when I get back.

Scott
hibbs@pacifier.com

*---------------------------------------------------------------------------
---*

You have received this message because you have subscribed to the
murphy-rebel mailing list.
To unsubscribe from this list, send an e-mail to: list-server@dcsol.com
with "unsubscribe murphy-rebel" in the body of the message.
For assistance contact mike.davis@dcsol.com

*---------------------------------------------------------------------------
---*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Does anyone have a wiring diagram for a Tru-Trak ADI??? If so could you please email it to me.... I don't have it yet but would like to run the wires and get ready to have it in the installation.. Thanks Dale SR-033



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Dale,

Try the TruTrak website, www.trutrakap.com.

They have installation documents and user manuals at
http://www.trutrakflightsystems.com/ttf ... tions.html.

The ADI install manual includes wiring diagrams.

R. Hoffman #687R
Eugene, OR USA!



On 3/7/2007 6:34 PM, dfultz17086@earthlink.net wrote to rebel-builders:

-> Does anyone have a wiring diagram for a Tru-Trak ADI??? If so could you
please email it to me.... I don't have it yet but would like to run the
wires and get ready to have it in the installation.. Thanks Dale SR-033





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------