[rebel-builders] Fuel Cap Question
Posted: Sun Feb 19, 2012 11:36 pm
Yes, I had the same problem and used AN 3/32" rivets. I used 6 rivets but 8 probably would be better. With proseal the cap seems to be stuck good.
Sent from my iPad
On 2012-01-15, at 6:13 PM, "Jerald Folkerts" <jfolkerts1@gmail.com> wrote:
[quote]My SR2500 kit has an SPRL non-locking flush rivet fuel cap. The pre-punched
hole in the skin is a 2 ¼ inch hole, the fuel cap is a hair less than 3â€
Sent from my iPad
On 2012-01-15, at 6:13 PM, "Jerald Folkerts" <jfolkerts1@gmail.com> wrote:
[quote]My SR2500 kit has an SPRL non-locking flush rivet fuel cap. The pre-punched
hole in the skin is a 2 ¼ inch hole, the fuel cap is a hair less than 3â€