[rebel-builders] LG 26 (centre tube) to Fuse 5s hardware access
Posted: Sun Feb 19, 2012 11:36 pm
Sent that too fast I meant toi add if you put the acess on top you can reach the nut and the bolt at the same time.
Sent on the TELUS Mobility network with BlackBerry
-----Original Message-----
From: drewjan@cabletv.on.ca
Sender: mike.davis@dcsol.com
Date: Wed, 11 Jan 2012 18:46:04
To: <rebel-builders@dcsol.com>
Reply-to: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] LG 26 (centre tube) to Fuse 5s hardware access
I would put the holes on top just under the seat that way you will be able to reach
Sent on the TELUS Mobility network with BlackBerry
-----Original Message-----
From: gleeso1 <gleeso1@iprimus.com.au>
Sender: mike.davis@dcsol.com
Date: Tue, 10 Jan 2012 13:06:14
To: <rebel-builders@dcsol.com>
Reply-to: rebel-builders@dcsol.com
Subject: [rebel-builders] LG 26 (centre tube) to Fuse 5s hardware access
Has anybody put access holes in the bottom skin (fuse 40) to get to the
5/16"nuts and washers on the LG 26 to Fuse 5s attachment?
I have the bungee gear and the Fuse 5s are not split. Any thoughts,
pros, cons, appreciated.
John Gleeson
Rebel 804 Down Under,
(where it's warm/hot) :-)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Sent on the TELUS Mobility network with BlackBerry
-----Original Message-----
From: drewjan@cabletv.on.ca
Sender: mike.davis@dcsol.com
Date: Wed, 11 Jan 2012 18:46:04
To: <rebel-builders@dcsol.com>
Reply-to: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] LG 26 (centre tube) to Fuse 5s hardware access
I would put the holes on top just under the seat that way you will be able to reach
Sent on the TELUS Mobility network with BlackBerry
-----Original Message-----
From: gleeso1 <gleeso1@iprimus.com.au>
Sender: mike.davis@dcsol.com
Date: Tue, 10 Jan 2012 13:06:14
To: <rebel-builders@dcsol.com>
Reply-to: rebel-builders@dcsol.com
Subject: [rebel-builders] LG 26 (centre tube) to Fuse 5s hardware access
Has anybody put access holes in the bottom skin (fuse 40) to get to the
5/16"nuts and washers on the LG 26 to Fuse 5s attachment?
I have the bungee gear and the Fuse 5s are not split. Any thoughts,
pros, cons, appreciated.
John Gleeson
Rebel 804 Down Under,
(where it's warm/hot) :-)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------