[rebel-builders] Rebel windshield

[Wayne G. O'Shea]

LP Aero will not sell direct.. Murphy owns the mould! Wish he'd just give
them permission to sell direct and commission him. They direct ship anyhow!

----- Original Message -----
From: "Curt Langholz" <c120pilot@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, January 06, 2012 8:37 PM
Subject: [rebel-builders] Rebel windshield

Is there any place besides MAM to get a windshield? I have emailed Daryl
to order one, no reply so far this week. I am sure he is busy but it would
be nice to still have decent service for builders.


Sent from my Windows Phone

-----Original Message-----
From: Ron Shannon
Sent: Friday, January 06, 2012 6:36 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Seat Rails and Seat Stops

Aha, that does help! :-)

Unless you're very short, I wouldn't worry about being able to use that
front end hole on the rail. FWIW, I'm 5 ft. 10 in. tall and would never
need to be that far forward. Stick with the 3/4" wide stop and "don't
worry, be happy!" :-)

Ron


On Fri, Jan 6, 2012 at 12:59 PM, Thomas Breitbach
<rebel@tbreitbach.de>wrote:

Ron,

this is hard to understand without a picture. I uploaded one showing my
problem under

http://www.tbreitbach.de/SeatRail.jpg

This probably best explains my question. The fabricated seat stop in
this picture is 3/4 " (as denoted by the manual).

Thomas
433R

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Jeff Micheal]

Only MAM for windshield.....
On 2012-01-06 5:43 PM, "Curt Langholz" <c120pilot@hotmail.com> wrote:

Is there any place besides MAM to get a windshield? I have emailed Daryl
to order one, no reply so far this week. I am sure he is busy but it would
be nice to still have decent service for builders.


Sent from my Windows Phone

-----Original Message-----
From: Ron Shannon
Sent: Friday, January 06, 2012 6:36 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Seat Rails and Seat Stops

Aha, that does help! :-)

Unless you're very short, I wouldn't worry about being able to use that
front end hole on the rail. FWIW, I'm 5 ft. 10 in. tall and would never
need to be that far forward. Stick with the 3/4" wide stop and "don't
worry, be happy!" :-)

Ron


On Fri, Jan 6, 2012 at 12:59 PM, Thomas Breitbach <rebel@tbreitbach.de

wrote:

Ron,

this is hard to understand without a picture. I uploaded one showing my
problem under

http://www.tbreitbach.de/SeatRail.jpg

This probably best explains my question. The fabricated seat stop in
this picture is 3/4 " (as denoted by the manual).

Thomas
433R

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Bob Patterson]

Hi Curtis !

They are doing the best they can ..... just be glad
there IS someone to email ! Darryl gets to the emails
after he gets home from working on the shop floor,
running machines - often after 9 pm ...
Long days, just to keep the parts coming.

If you don't get an answer within about 10 days,
please re-send, to: Shipping@murphyair.com
Sometimes good emails get grabbed by the spam
filters ...

The windshield will be drop-shipped directly to you,
likely in a few weeks, once the order is in.


......bobp
bobp@prosumers.ca
bobp@pattersys.com
http://www.Pattersys.com
http://www.PattersonAeroSales.com
http://www.amway.ca/BobPatterson

De-fenestrate now ! Linux is the answer !

Any views expressed in this message are those of the individual sender
and do not necessarily reflect the views of any other entities or persons.
Any action taken as a result of the contents of this email is totally the
responsibility of the reader.

http://www.danasoft.com/sig/pssignTux.jpg



On Friday 06 January 2012 20:37:39 Curt Langholz wrote:

Is there any place besides MAM to get a windshield? I have emailed Daryl
to order one, no reply so far this week. I am sure he is busy but it would
be nice to still have decent service for builders.


Sent from my Windows Phone

-----Original Message-----
From: Ron Shannon
Sent: Friday, January 06, 2012 6:36 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Seat Rails and Seat Stops

Aha, that does help! :-)

Unless you're very short, I wouldn't worry about being able to use that
front end hole on the rail. FWIW, I'm 5 ft. 10 in. tall and would never
need to be that far forward. Stick with the 3/4" wide stop and "don't
worry, be happy!" :-)

Ron

On Fri, Jan 6, 2012 at 12:59 PM, Thomas Breitbach

<rebel@tbreitbach.de>wrote:

Ron,

this is hard to understand without a picture. I uploaded one showing my
problem under

http://www.tbreitbach.de/SeatRail.jpg

This probably best explains my question. The fabricated seat stop in
this picture is 3/4 " (as denoted by the manual).

Thomas
433R

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Curt Langholz]

Ok, thanks. I will be patient. Working 80+hrs a week myself. Just getting the parts to get er up!

Sent from my Windows Phone

-----Original Message-----
From: Bob Patterson
Sent: Friday, January 06, 2012 9:42 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Rebel windshield


Hi Curtis !

They are doing the best they can ..... just be glad
there IS someone to email ! Darryl gets to the emails
after he gets home from working on the shop floor,
running machines - often after 9 pm ...
Long days, just to keep the parts coming.

If you don't get an answer within about 10 days,
please re-send, to: Shipping@murphyair.com
Sometimes good emails get grabbed by the spam
filters ...

The windshield will be drop-shipped directly to you,
likely in a few weeks, once the order is in.


......bobp
bobp@prosumers.ca
bobp@pattersys.com
http://www.Pattersys.com
http://www.PattersonAeroSales.com
http://www.amway.ca/BobPatterson

De-fenestrate now ! Linux is the answer !

Any views expressed in this message are those of the individual sender
and do not necessarily reflect the views of any other entities or persons



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Roland Kriening]

I will second Bobp to say that Darryl will respond to your email at some
point and has always been great at shipping parts out to me. At this point I
should have stock in the company I ordered the windshield from Murphy
and as bob says it is shipped to your door from the east coast I believe. I
had mine shipped to at UPS outlet in the states, then drove over to bring it
across. Saved me on the brokerage fees. I too worried about Murphy not
getting back to me, but be patient, it's a small shop now with less than a
handful of employees. Owning a small business myself I know difficult it
can be wearing many hats at once. Personally I'm glad he is still in
business or my project would be dead in the water.

Roland
R56

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Bob
Patterson
Sent: Friday, January 06, 2012 9:43 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Rebel windshield


Hi Curtis !

They are doing the best they can ..... just be glad
there IS someone to email ! Darryl gets to the emails
after he gets home from working on the shop floor,
running machines - often after 9 pm ...
Long days, just to keep the parts coming.

If you don't get an answer within about 10 days,
please re-send, to: Shipping@murphyair.com
Sometimes good emails get grabbed by the spam
filters ...

The windshield will be drop-shipped directly to you,
likely in a few weeks, once the order is in.


......bobp
bobp@prosumers.ca
bobp@pattersys.com
http://www.Pattersys.com
http://www.PattersonAeroSales.com
http://www.amway.ca/BobPatterson

De-fenestrate now ! Linux is the answer !

Any views expressed in this message are those of the individual sender
and do not necessarily reflect the views of any other entities or persons.
Any action taken as a result of the contents of this email is totally the
responsibility of the reader.

http://www.danasoft.com/sig/pssignTux.jpg



On Friday 06 January 2012 20:37:39 Curt Langholz wrote:

Is there any place besides MAM to get a windshield? I have emailed Daryl
to order one, no reply so far this week. I am sure he is busy but it would
be nice to still have decent service for builders.


Sent from my Windows Phone

-----Original Message-----
From: Ron Shannon
Sent: Friday, January 06, 2012 6:36 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Seat Rails and Seat Stops

Aha, that does help! :-)

Unless you're very short, I wouldn't worry about being able to use that
front end hole on the rail. FWIW, I'm 5 ft. 10 in. tall and would never
need to be that far forward. Stick with the 3/4" wide stop and "don't
worry, be happy!" :-)

Ron

On Fri, Jan 6, 2012 at 12:59 PM, Thomas Breitbach

<rebel@tbreitbach.de>wrote:

Ron,

this is hard to understand without a picture. I uploaded one showing my
problem under

http://www.tbreitbach.de/SeatRail.jpg

This probably best explains my question. The fabricated seat stop in
this picture is 3/4 " (as denoted by the manual).

Thomas
433R

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[mike jones]

I got my windshield same way, shipped to buffalo then brought across to
Canada myself, did not take long and darryl did all the emails, give him
time he will get to you

Cheers

Mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Roland
Kriening
Sent: Sunday, January 08, 2012 8:36 AM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Rebel windshield

I will second Bobp to say that Darryl will respond to your email at some
point and has always been great at shipping parts out to me. At this point I
should have stock in the company I ordered the windshield from Murphy
and as bob says it is shipped to your door from the east coast I believe. I
had mine shipped to at UPS outlet in the states, then drove over to bring it
across. Saved me on the brokerage fees. I too worried about Murphy not
getting back to me, but be patient, it's a small shop now with less than a
handful of employees. Owning a small business myself I know difficult it
can be wearing many hats at once. Personally I'm glad he is still in
business or my project would be dead in the water.

Roland
R56

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Bob
Patterson
Sent: Friday, January 06, 2012 9:43 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Rebel windshield


Hi Curtis !

They are doing the best they can ..... just be glad
there IS someone to email ! Darryl gets to the emails
after he gets home from working on the shop floor,
running machines - often after 9 pm ...
Long days, just to keep the parts coming.

If you don't get an answer within about 10 days,
please re-send, to: Shipping@murphyair.com
Sometimes good emails get grabbed by the spam
filters ...

The windshield will be drop-shipped directly to you,
likely in a few weeks, once the order is in.


......bobp
bobp@prosumers.ca
bobp@pattersys.com
http://www.Pattersys.com
http://www.PattersonAeroSales.com
http://www.amway.ca/BobPatterson

De-fenestrate now ! Linux is the answer !

Any views expressed in this message are those of the individual sender
and do not necessarily reflect the views of any other entities or persons.
Any action taken as a result of the contents of this email is totally the
responsibility of the reader.

http://www.danasoft.com/sig/pssignTux.jpg



On Friday 06 January 2012 20:37:39 Curt Langholz wrote:

Is there any place besides MAM to get a windshield? I have emailed Daryl
to order one, no reply so far this week. I am sure he is busy but it would
be nice to still have decent service for builders.


Sent from my Windows Phone

-----Original Message-----
From: Ron Shannon
Sent: Friday, January 06, 2012 6:36 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Seat Rails and Seat Stops

Aha, that does help! :-)

Unless you're very short, I wouldn't worry about being able to use that
front end hole on the rail. FWIW, I'm 5 ft. 10 in. tall and would never
need to be that far forward. Stick with the 3/4" wide stop and "don't
worry, be happy!" :-)

Ron

On Fri, Jan 6, 2012 at 12:59 PM, Thomas Breitbach

<rebel@tbreitbach.de>wrote:

Ron,

this is hard to understand without a picture. I uploaded one showing my
problem under

http://www.tbreitbach.de/SeatRail.jpg

This probably best explains my question. The fabricated seat stop in
this picture is 3/4 " (as denoted by the manual).

Thomas
433R

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Curt Langholz]

Thanks. I am sure he will get back to me .

Sent from my Windows Phone

-----Original Message-----
From: mike jones
Sent: Sunday, January 08, 2012 3:28 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Rebel windshield

I got my windshield same way, shipped to buffalo then brought across to
Canada myself, did not take long and darryl did all the emails, give him
time he will get to you

Cheers

Mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Roland
Kriening
Sent: Sunday, January 08, 2012 8:36 AM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Rebel windshield

I will second Bobp to say that Darryl will respond to your email at some
point and has always been great at shipping parts out to me. At this point I
should have stock in the company I ordered the windshield from Murphy
and as bob says it is shipped to your door from the east coast I believe. I
had mine shipped to at UPS outlet in the states, then drove over to bring it
across. Saved me on the brokerage fees. I too worried about Murphy not
getting back to me, but be patient, it's a small shop now with less than a
handful of employees. Owning a small business myself I know difficult it
can be wearing many hats at once. Personally I'm glad he is still in
business or my project would be dead in the water.

Roland
R56

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Bob
Patterson
Sent: Friday, January 06, 2012 9:43 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Rebel windshield


Hi Curtis !

They are doing the best they can ..... just be glad
there IS someone to email ! Darryl gets to the emails
after he gets home from working on the shop floor,
running machines - often after 9 pm ...
Long days, just to keep the parts coming.

If you don't get an answer within about 10 days,
please re-send, to: Shipping@murphyair.com
Sometimes good emails get grabbed by the spam
filters ...

The windshield will be drop-shipped directly to you,
likely in a few weeks, once the order is in.


......bobp
bobp@prosumers.ca
bobp@pattersys.com
http://www.Pattersys.com
http://www.PattersonAeroSales.com
http://www.amway.ca/BobPatterson

De-fenestrate now ! Linux is the answer !

Any views expressed in this message are those of the individual sender
and do not necessarily reflect the views of any other entities or persons



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------