Fus 40 placement
Posted: Fri Feb 17, 2012 4:21 pm
Received: from MMoreho699@aol.com
by imo19.mx.aol.com (IMOv14_b1.1) id EHHTa04364
for <murphy-rebel@dcsol.com>; Sat, 13 Jun 1998 12:35:18 -0400 (EDT)
From: <MMoreho699@aol.com>
Message-ID: <769c6d3.3582aa47@aol.com>
Date: Sat, 13 Jun 1998 12:35:18 EDT
To: murphy-rebel@dcsol.com
Mime-Version: 1.0
Subject: Fus 40 placement
Content-type: multipart/mixed;
boundary="part0_897755718_boundary"
X-Mailer: AOL 3.0 for Mac sub 84
Content-ID: <0_897755718@inet_out.mail.aol.com.1>
Content-type: text/plain; charset=US-ASCII
Hello!
Here's my most recent attempt at posting .jpg's. If anybody has software for
a
Mac to compress them to be expanded by a PC, I'd like to have a copy.
Kerry at Murphy said the front edge row of holes on Fus 40 centers on the
rear
carrythrough which leaves the second row about an inch rearward from the
carrythrough with no bulkhead or anything there yet. The last row of holes
doesn't have anything in it yet either. The picture is from the left of the
cockpit looking through the doorway. I marked the rows of holes with tape to
show up. The measuring tape is in inches.
Take care,
Dan
R280
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
by imo19.mx.aol.com (IMOv14_b1.1) id EHHTa04364
for <murphy-rebel@dcsol.com>; Sat, 13 Jun 1998 12:35:18 -0400 (EDT)
From: <MMoreho699@aol.com>
Message-ID: <769c6d3.3582aa47@aol.com>
Date: Sat, 13 Jun 1998 12:35:18 EDT
To: murphy-rebel@dcsol.com
Mime-Version: 1.0
Subject: Fus 40 placement
Content-type: multipart/mixed;
boundary="part0_897755718_boundary"
X-Mailer: AOL 3.0 for Mac sub 84
Content-ID: <0_897755718@inet_out.mail.aol.com.1>
Content-type: text/plain; charset=US-ASCII
Hello!
Here's my most recent attempt at posting .jpg's. If anybody has software for
a
Mac to compress them to be expanded by a PC, I'd like to have a copy.
Kerry at Murphy said the front edge row of holes on Fus 40 centers on the
rear
carrythrough which leaves the second row about an inch rearward from the
carrythrough with no bulkhead or anything there yet. The last row of holes
doesn't have anything in it yet either. The picture is from the left of the
cockpit looking through the doorway. I marked the rows of holes with tape to
show up. The measuring tape is in inches.
Take care,
Dan
R280
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------