[rebel-builders] Needed Position Light Parts
Posted: Sun Feb 19, 2012 11:34 pm
WHat brand are your lights Jerry. I have some grimes parts that you can Have.
Sent on the TELUS Mobility network with BlackBerry
-----Original Message-----
From: Jerald Folkerts <jfolkerts1@gmail.com>
Sender: mike.davis@dcsol.com
Date: Fri, 14 Oct 2011 15:21:24
To: <rebel-builders@dcsol.com>
Reply-to: rebel-builders@dcsol.com
Subject: [rebel-builders] Needed Position Light Parts
At Sun-N-Fun this year, I purchased a used set of position/tail lights in
the tent. My plan was to use the PSA Enterprises LED replacement lenses for
a simple LED lighting system on my Murphy Super Rebel. When I got home, one
of the lights had no guts, i.e. the spring, phenolic washer, plastic washer,
wood spacer, and metal center pin. Before I hit the salvage yards, does
anyone have a single light or light parts laying around? I just need the
guts - WTB. I suppose I could machine the parts as well - probably not to
difficult other than time. Lesson learned, beware of parts in sealed bags.
Thanks,
Jerry Folkerts
SR2500 #093
www.mykitlog.com/jfolkerts
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Sent on the TELUS Mobility network with BlackBerry
-----Original Message-----
From: Jerald Folkerts <jfolkerts1@gmail.com>
Sender: mike.davis@dcsol.com
Date: Fri, 14 Oct 2011 15:21:24
To: <rebel-builders@dcsol.com>
Reply-to: rebel-builders@dcsol.com
Subject: [rebel-builders] Needed Position Light Parts
At Sun-N-Fun this year, I purchased a used set of position/tail lights in
the tent. My plan was to use the PSA Enterprises LED replacement lenses for
a simple LED lighting system on my Murphy Super Rebel. When I got home, one
of the lights had no guts, i.e. the spring, phenolic washer, plastic washer,
wood spacer, and metal center pin. Before I hit the salvage yards, does
anyone have a single light or light parts laying around? I just need the
guts - WTB. I suppose I could machine the parts as well - probably not to
difficult other than time. Lesson learned, beware of parts in sealed bags.
Thanks,
Jerry Folkerts
SR2500 #093
www.mykitlog.com/jfolkerts
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------