Page 1 of 1

[rebel-builders] brake calipers

Posted: Sun Feb 19, 2012 8:55 pm
by Ron Shannon
Nope. Grease there will attract dirt and/or get on the pads -- neither of
which is a desired outcome. :-)

Ron


On Thu, Sep 1, 2011 at 4:30 PM, mike jones <mfjrebel007r@cogeco.ca> wrote:
Hi all



Can some one tell me if I need to grease or oil the arms that the brake
calipers side on



Thanks



mike



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] brake calipers

Posted: Sun Feb 19, 2012 8:55 pm
by Dick Wampach
If you are talking about the two pins that the calipers ride on...yes.

For many years I have polished these pins with a fine abrasive cloth or fine
sand paper, then spray with a silicone spray product only.
Do not use anything oily that will pick up the dust from the brakes or
"road" dirt.
That will only make a sticky mess, and the caliper will not slide freely for
very long.

Dick Wampach SR-108 N331RW




----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of mike
jones
Sent: Thursday, September 01, 2011 4:31 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] brake calipers


Hi all



Can some one tell me if I need to grease or oil the arms that the brake
calipers side on



Thanks



mike





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] brake calipers

Posted: Sun Feb 19, 2012 8:55 pm
by Chris Hodgson
Try molybdenum disulfide, or boron nitride, or the easiest to get - graphite.

Chris
----- Original Message -----
From: Ron Shannon <rshannon@cruzcom.com>
Date: Thursday, September 1, 2011 6:06 pm
Subject: Re: [rebel-builders] brake calipers
To: rebel-builders@dcsol.com
Nope. Grease there will attract dirt and/or get on the pads --
neither of
which is a desired outcome. :-)

Ron


On Thu, Sep 1, 2011 at 4:30 PM, mike jones
<mfjrebel007r@cogeco.ca> wrote:
Hi all



Can some one tell me if I need to grease or oil the arms that
the brake
calipers side on



Thanks



mike



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------