The Murphy Builders Site

I have pics of the process, which I did back in June, on my site. See
http://n254mr.com, search for "drain grommets". Cut holes in D shape
(assuming seaplane-type), apply 2-3 coats of Poly Tack under, 8-10 min
apart, apply drain, put dollar patch over top, a coat of pink, shrink patch,
especially edges, then 3 more coats of pink, then silver.
Ron


On Sat, Aug 20, 2011 at 9:49 AM, mike jones <mfjrebel007r@cogeco.ca> wrote:

Hi all



Does anyone have pics of their flap drains, poly fibre says to cover with
strip of fabric, I forgot to install and have sprayed the silver protective
coat on the flaps, do I know have to remove all of it to glue the drain on
with polytack



Mike#007

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Fantastic, thanks very much ron, looks great, did not guess to cut hole in
dollar patch, thought it would just go right over top

Cheers

Mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Ron
Shannon
Sent: Saturday, August 20, 2011 10:34 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] flap drains

I have pics of the process, which I did back in June, on my site. See
http://n254mr.com, search for "drain grommets". Cut holes in D shape
(assuming seaplane-type), apply 2-3 coats of Poly Tack under, 8-10 min
apart, apply drain, put dollar patch over top, a coat of pink, shrink patch,
especially edges, then 3 more coats of pink, then silver.
Ron


On Sat, Aug 20, 2011 at 9:49 AM, mike jones <mfjrebel007r@cogeco.ca> wrote:

Hi all



Does anyone have pics of their flap drains, poly fibre says to cover with
strip of fabric, I forgot to install and have sprayed the silver

protective

coat on the flaps, do I know have to remove all of it to glue the drain on
with polytack



Mike#007

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

The photos from that search aren't the best. I think I have some more I'll
try to get posted.

To cut the hole in the dollar patch, fold them in half. Like everything else
in the &#$@! plane, I had to make several of these before I got them right,
with holes reasonably well centered, etc.

Ron


On Sat, Aug 20, 2011 at 10:53 AM, mike jones <mfjrebel007r@cogeco.ca> wrote:

Fantastic, thanks very much ron, looks great, did not guess to cut hole in
dollar patch, thought it would just go right over top

Cheers

Mike#007

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Apologies if stating the obvious but melting the final (or all) of the
holes with a soldering pencil or hot nail is recommended. It can be the
last thing or even after painting.
Ken

On 8/20/2011 2:03 PM, Ron Shannon wrote:

The photos from that search aren't the best. I think I have some more I'll
try to get posted.

To cut the hole in the dollar patch, fold them in half. Like everything else
in the&#$@! plane, I had to make several of these before I got them right,
with holes reasonably well centered, etc.

Ron


On Sat, Aug 20, 2011 at 10:53 AM, mike jones<mfjrebel007r@cogeco.ca> wrote:

Fantastic, thanks very much ron, looks great, did not guess to cut hole in
dollar patch, thought it would just go right over top

Cheers

Mike#007

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------