[rebel-builders] Avex rivets
Posted: Sun Feb 19, 2012 8:54 pm
The tank rivets are different. They are a closed end rivet. You can get
them from several of the common rivet distributors.
----- Original Message -----
From: <kpierson@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Thursday, July 28, 2011 8:44 PM
Subject: [rebel-builders] Avex rivets
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
them from several of the common rivet distributors.
----- Original Message -----
From: <kpierson@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Thursday, July 28, 2011 8:44 PM
Subject: [rebel-builders] Avex rivets
The rightwing tank on my Meranda has started leaking, they are
welded up tanks and a couple of the weldes have broken loose so
the bottem skin of the tank has pulled away from the internal
baffels. My plan is to reatach them using Avex rivets and Pro-seal
My question is, are the rivets used on the tanks different than
the standred ones that are used on the Rebel?
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------