[rebel-builders] G. Mohr's bungee gear pivot block info
Posted: Sun Feb 19, 2012 8:51 pm
You may want to try calling him at (250) 638-8919. This is the latest phone
number I have.
Joe Ronco
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
caltrac@dcsol.com
Sent: Sunday, June 26, 2011 12:15 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] G. Mohr's bungee gear pivot block info
6-26-11, I'm trying to make contact with G. Mohr for his machined pivot
block
for the Rebel bungee gear. I've tried his email but they failed...! I
tried
these two email's as suggested by other's but they didn't work.
(gtmohr@telus.net) (failed)and (gmohr@telus.net) (failed)
.?? Does anyone have a better email ..?? or ..?? Does anyone know if he
is
still producing this item...?
Rebel's bungee gear/fuselage pivot has finally broken due to too many
"rough" field landing's and takeoff's, I guess. My gear has the 1" dia.
stub and broke at the bolt hole. (not strong enough), however I'm glad the
gear failed at that point and not some major airframe part. But I'm afraid
that I won't be able to buy a replacement part from the factory any longer
as my last venture with them was a six month's delay before giving up. So
any ideas in fabing a replacement would be a great help also. I've located
some AL 6061-T6 1"x 0.125" stock, so I just a little help with the final
dimension's or improved design if any. tks all.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username "rebel"
password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
number I have.
Joe Ronco
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
caltrac@dcsol.com
Sent: Sunday, June 26, 2011 12:15 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] G. Mohr's bungee gear pivot block info
6-26-11, I'm trying to make contact with G. Mohr for his machined pivot
block
for the Rebel bungee gear. I've tried his email but they failed...! I
tried
these two email's as suggested by other's but they didn't work.
(gtmohr@telus.net) (failed)and (gmohr@telus.net) (failed)
.?? Does anyone have a better email ..?? or ..?? Does anyone know if he
is
still producing this item...?
Rebel's bungee gear/fuselage pivot has finally broken due to too many
"rough" field landing's and takeoff's, I guess. My gear has the 1" dia.
stub and broke at the bolt hole. (not strong enough), however I'm glad the
gear failed at that point and not some major airframe part. But I'm afraid
that I won't be able to buy a replacement part from the factory any longer
as my last venture with them was a six month's delay before giving up. So
any ideas in fabing a replacement would be a great help also. I've located
some AL 6061-T6 1"x 0.125" stock, so I just a little help with the final
dimension's or improved design if any. tks all.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username "rebel"
password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------