Hey, Wayne.
I only built two bays in the wing for fuel, so I have two rear bulkheads
that you can have if you want them. Send me an address.
tjhickey@iowatelecom.net.
If you want them, be quick, we leave for Spain for a vacation in a week.
(Could somebody shut off the Volcano in Iceland for a couple of weeks?)
Tim Hickey
-----Original Message-----
From: Wayne G. O'Shea
Sent: Monday, June 13, 2011 4:01 PM
To: Murphy Rebel Builders List
Subject: [rebel-builders] Parts needed - Rebel wing parts
Hey guys ! Looks like I may have a reconstruction job to do later this
summer. One of those "better idea" Rebels where they cut the stringers AND
RIBS out and then plopped fiberglass tanks in the 3 bays on each wing.
I have 4 normal main wing ribs hanging on the wall.... so good there I
think, but may need a few solid main ribs and 6 rear tank bulkheads (the
formed rectangular bulkhead that closes off the rear of the tank fwd of the
torque tube). Also two filler necks and caps.
If anyone has any of these left over from possibly doing a single wing tank
or only 2 bays per side or some structural welded tank deal let me know as
I'd like to purchase your spare parts so I can have what I need on hand
before the customer drops his wings off.
Thanks,
Wayne
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
[rebel-builders] Parts needed - Rebel wing parts
[rebel-builders] Parts needed - Rebel wing parts
Thanks Tim!
----- Original Message -----
From: <tjhickey@iowatelecom.net>
To: <rebel-builders@dcsol.com>
Sent: Monday, June 13, 2011 10:09 PM
Subject: Re: [rebel-builders] Parts needed - Rebel wing parts
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
----- Original Message -----
From: <tjhickey@iowatelecom.net>
To: <rebel-builders@dcsol.com>
Sent: Monday, June 13, 2011 10:09 PM
Subject: Re: [rebel-builders] Parts needed - Rebel wing parts
Hey, Wayne.
I only built two bays in the wing for fuel, so I have two rear bulkheads
that you can have if you want them. Send me an address.
tjhickey@iowatelecom.net.
If you want them, be quick, we leave for Spain for a vacation in a week.
(Could somebody shut off the Volcano in Iceland for a couple of weeks?)
Tim Hickey
-----Original Message-----
From: Wayne G. O'Shea
Sent: Monday, June 13, 2011 4:01 PM
To: Murphy Rebel Builders List
Subject: [rebel-builders] Parts needed - Rebel wing parts
Hey guys ! Looks like I may have a reconstruction job to do later this
summer. One of those "better idea" Rebels where they cut the stringers AND
RIBS out and then plopped fiberglass tanks in the 3 bays on each wing.
I have 4 normal main wing ribs hanging on the wall.... so good there I
think, but may need a few solid main ribs and 6 rear tank bulkheads (the
formed rectangular bulkhead that closes off the rear of the tank fwd of
the
torque tube). Also two filler necks and caps.
If anyone has any of these left over from possibly doing a single wing
tank
or only 2 bays per side or some structural welded tank deal let me know as
I'd like to purchase your spare parts so I can have what I need on hand
before the customer drops his wings off.
Thanks,
Wayne
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------