The Murphy Builders Site

Hey guys ! Looks like I may have a reconstruction job to do later this
summer. One of those "better idea" Rebels where they cut the stringers AND
RIBS out and then plopped fiberglass tanks in the 3 bays on each wing.

I have 4 normal main wing ribs hanging on the wall.... so good there I
think, but may need a few solid main ribs and 6 rear tank bulkheads (the
formed rectangular bulkhead that closes off the rear of the tank fwd of the
torque tube). Also two filler necks and caps.

If anyone has any of these left over from possibly doing a single wing tank
or only 2 bays per side or some structural welded tank deal let me know as
I'd like to purchase your spare parts so I can have what I need on hand
before the customer drops his wings off.

Thanks,
Wayne





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------