spring gear changes?

[Mike Davis]

Received: from MMoreho699@aol.com
by imo15.mx.aol.com (IMOv14_b1.1) id EMZCa05133
for <murphy-rebel@dcsol.com>; Fri, 5 Jun 1998 02:35:51 -0400 (EDT)
From: <MMoreho699@aol.com>
Message-ID: <788d75fc.357791c8@aol.com>
Date: Fri, 5 Jun 1998 02:35:51 EDT
To: murphy-rebel@dcsol.com
Mime-Version: 1.0
Subject: spring gear changes?
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
X-Mailer: AOL 2.7 for Mac sub 3

Hello!

Since I am doing the spring gear, I have heard that I don't need fus 61. See
p
13-96 fig 87d of 3/14/95 for the rebel. If this is so, what options are
there
for fus 45 (landing gear attach brackets) and other bulkheads?

Thanks,
Dan
R280



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Mike Davis]

Received: from JimsRebel@aol.com
by imo20.mx.aol.com (IMOv14_b1.1) id ELVAa04312
for <murphy-rebel@dcsol.com>; Fri, 5 Jun 1998 12:34:52 -0400 (EDT)
From: <JimsRebel@aol.com>
Message-ID: <646f1e8a.35781e2d@aol.com>
Date: Fri, 5 Jun 1998 12:34:52 EDT
To: murphy-rebel@dcsol.com
Mime-Version: 1.0
Subject: Re: spring gear changes?
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
X-Mailer: AOL 3.0 for Windows 95 sub 49

Hi Spring gear fans
The Spring gear Rebel I looked at in Libby, Montana still had the rear
attach
brackets. Some people cut them off flush with the fuselage. I plan on
leaving
them on ,, maybe but a step there or something else I might want to mount to
the outside of the airplane?
PS Your Manual is newer than mine (07/27/94)
Good Luck Jim S/N 254 JimsRebel@aol.Com



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Mike Davis]

Received: from [205.163.8.199] (drk.cts.com [205.163.8.199]) by mh2.cts.com
(8.8.7/8.8.5) with ESMTP id TAA27392 for <murphy-rebel@dcsol.com>; Fri, 5
Jun 1998 19:56:37 -0700 (PDT)
X-Sender: drk@crash.cts.com
Message-Id: <v04003a00b19e6cfcfbf1@[205.163.8.199]>
In-Reply-To: <788d75fc.357791c8@aol.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Date: Fri, 5 Jun 1998 19:56:01 -0800
To: <murphy-rebel@dcsol.com> (Murphy Rebel)
From: Dave Klimas <drk@cts.com>
Subject: Re: spring gear changes?

Dan;
I elected to install everything in the designed location except I will not
actually poke holes in the skin and install the brackets and spacers.

Dave Klimas
Rebel #472
Ramona, CA

Hello!

Since I am doing the spring gear, I have heard that I don't need fus 61.

See p

13-96 fig 87d of 3/14/95 for the rebel. If this is so, what options are

there

for fus 45 (landing gear attach brackets) and other bulkheads?

Thanks,
Dan
R280

Dave & Bert Klimas
Rebel #472
Ramona, CA





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Mike Davis]

Received: from MMoreho699@aol.com
by imo14.mx.aol.com (IMOv14_b1.1) id EENTa05702
for <murphy-rebel@dcsol.com>; Sat, 6 Jun 1998 22:07:03 +2000 (EDT)
From: <MMoreho699@aol.com>
Message-ID: <acb8b280.3579f5c8@aol.com>
Date: Sat, 6 Jun 1998 22:07:03 EDT
To: murphy-rebel@dcsol.com
Mime-Version: 1.0
Subject: Re: Re: spring gear changes?
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
X-Mailer: AOL 2.7 for Mac sub 3

Thanks Dave!

Dan



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------