The Murphy Builders Site

Hello,

I've just finished the roof plate but there are difficulties with the removal of
the protection foil. The foil is on the sheet for almost 15 years now.

I have tried paint remover, a paint stripper and several chemicals without
result.

Any suggestions will be appreciated.

Marc



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Canadian Tire sells a miniature household steam wand called the Steam
Shark. It works very well for getting the foil warm and soft enough so it
peels off in one piece.

Allen H.


On 5/7/2011 11:22 PM, Marc van Hulzen wrote to murphy rebel list:

-> Hello,
->
-> I've just finished the roof plate but there are difficulties with the removal
of
-> the protection foil. The foil is on the sheet for almost 15 years now.
->
-> I have tried paint remover, a paint stripper and several chemicals without
-> result.
->
-> Any suggestions will be appreciated.
->
-> Marc




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------