The Murphy Builders Site

After 2 hours of work, I now have a tail that is straight. I drilled out the
nine rivets, and I could easily move the spar attach 1/2" or so. I put a
doubler both on the front and back of the bulkhead for added strength and to
catch the new holes. I may also put a small dorsal fin on the front of the
tail for additional strength... oh yeh and I like the way it looks.

For those of you who have yet to mount your tail... definitely keep it
straight.

Roland
R56





-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Ron
Shannon
Sent: Friday, April 08, 2011 12:06 PM
To: rebel-builders@dcsol.com
Cc: Roland Kriening
Subject: Re: [rebel-builders] Tail Fin Angle

Roland, I've also been keeping an eye on development of the Viking,
and look forward to seeing how it works for you. As someone who is
happy he chose an engine that, so far as I know, is only the second
example on a Rebel so far, I applaud and support your innovation.

Get that fin to neutral, and go for it! :)

Ron

http://n2545mr.com



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------