The Murphy Builders Site

Kelly Your E address bounced, please send it to me direct. I will then try
again.

Also will include Curtis Langholz c120pilot@hotmail.com

Dick Wampach rwampach@att.net

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Kelly
M. Ewing
Sent: Thursday, March 31, 2011 3:52 PM
To: MAM email list
Subject: Re: [rebel-builders] Brake cylinders


That would be great, when you have time Dick. (Photos) I have order the
spruce parts and am doing the same thing.

Thanks again
Kelly
kelly@tru-form.ca
Enjoy your day !


-----Original Message-----
From: "Dick Wampach" <rwampach@att.net>
Sender: <mike.davis@dcsol.com>
Date: Thu, 31 Mar 2011 15:46:31
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Brake cylinders


I have added the Matco masters with fluid reservoirs to the right side and
ran the hoses in series from co-pilot to pilot then to a dual on/off
parking
brake valve, and on to the wheels. Source was Acft Spruce. I do have
photos if you want?

Dick Wampach SR-108 N331RW

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Kelly
M. Ewing
Sent: Thursday, March 31, 2011 10:15 AM
To: MAM email list
Subject: [rebel-builders] Brake cylinders


Does anyone know what brake cylinders MAM used when distributing with the
moose? I want to add 2 to the co pilot side and I'm not sure if Spruce has
them or someone else.

Thanks
Kelly (Moose)
kelly@tru-form.ca
Enjoy your day !






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Date: Fri, 1 Apr 2011 18:53:13 -0400
Subject: Re: [rebel-builders] Brake cylinders photos
From: fredmessinger@gmail.com
To: rebel-builders@dcsol.com

Hi Dick - me too! fredmessinger@gmail.com

Thanks,
Fred

On Fri, Apr 1, 2011 at 3:21 PM, Dick Wampach <rwampach@att.net> wrote:

Kelly Your E address bounced, please send it to me direct. I will then try
again.

Also will include Curtis Langholz c120pilot@hotmail.com

Dick Wampach rwampach@att.net

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Kelly
M. Ewing
Sent: Thursday, March 31, 2011 3:52 PM
To: MAM email list
Subject: Re: [rebel-builders] Brake cylinders


That would be great, when you have time Dick. (Photos) I have order the
spruce parts and am doing the same thing.

Thanks again
Kelly
kelly@tru-form.ca
Enjoy your day !


-----Original Message-----
From: "Dick Wampach" <rwampach@att.net>
Sender: <mike.davis@dcsol.com>
Date: Thu, 31 Mar 2011 15:46:31
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Brake cylinders


I have added the Matco masters with fluid reservoirs to the right side and
ran the hoses in series from co-pilot to pilot then to a dual on/off
parking
brake valve, and on to the wheels. Source was Acft Spruce. I do have
photos if you want?

Dick Wampach SR-108 N331RW

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Kelly
M. Ewing
Sent: Thursday, March 31, 2011 10:15 AM
To: MAM email list
Subject: [rebel-builders] Brake cylinders


Does anyone know what brake cylinders MAM used when distributing with the
moose? I want to add 2 to the co pilot side and I'm not sure if Spruce has
them or someone else.

Thanks
Kelly (Moose)
kelly@tru-form.ca
Enjoy your day !






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hi Dick - me too! fredmessinger@gmail.com

Also will include Curtis Langholz c120pilot@hotmail.com

kelly@tru-form.ca

From: "Dick Wampach" <rwampach@att.net>

side and ran the hoses in series from co-pilot to pilot then to a
dual on/off parking brake valve, and on to the wheels. Source was
Acft Spruce. I do have photos if you want?

Dick Wampach SR-108 N331RW

Does anyone know what brake cylinders MAM used when distributing
with the moose? I want to add 2 to the co pilot side and I'm not
sure if Spruce has them or someone else.

Thanks
Kelly (Moose)
kelly@tru-form.ca
Enjoy your day !

Hi guys, I love sharing ...but who else wants information on my
SR-3500
brake pedal set-up.
Please let me know and I will try one more mailing on about Monday

Dick Wampach SR-108 N331RW


Ditto: ricka10@msn.com'

Thanks,

Rick

Hi Dick - me too! fredmessinger@gmail.com

Also will include Curtis Langholz c120pilot@hotmail.com

kelly@tru-form.ca

From: "Dick Wampach" <rwampach@att.net>

I have added the Matco masters with fluid reservoirs to the right

side and ran the hoses in series from co-pilot to pilot then to a
dual on/off parking brake valve, and on to the wheels. Source was
Acft Spruce. I do have photos if you want?

Dick Wampach SR-108 N331RW

Does anyone know what brake cylinders MAM used when distributing
with the moose? I want to add 2 to the co pilot side and I'm not
sure if Spruce has them or someone else.

Thanks
Kelly (Moose)
kelly@tru-form.ca
Enjoy your day !

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hi guys, I love sharing ...but who else wants information on my SR-3500
brake pedal set-up.
Please let me know and I will try one more mailing on about Monday

Dick Wampach SR-108 N331RW