[rebel-builders] Brake cylinders photos

[Dick Wampach]

Kelly Your E address bounced, please send it to me direct. I will then try
again.

Also will include Curtis Langholz c120pilot@hotmail.com

Dick Wampach rwampach@att.net

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Thursday, March 31, 2011 3:52 PM
To: MAM email list
Subject: Re: [rebel-builders] Brake cylinders


That would be great, when you have time Dick. (Photos) I have order the
spruce parts and am doing the same thing.

Thanks again
Kelly
kelly@tru-form.ca
Enjoy your day !


-----Original Message-----
From: "Dick Wampach" <rwampach@att.net>
Sender: <mike.davis@dcsol.com>
Date: Thu, 31 Mar 2011 15:46:31
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Brake cylinders


I have added the Matco masters with fluid reservoirs to the right side and
ran the hoses in series from co-pilot to pilot then to a dual on/off parking
brake valve, and on to the wheels. Source was Acft Spruce. I do have
photos if you want?

Dick Wampach SR-108 N331RW

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Thursday, March 31, 2011 10:15 AM
To: MAM email list
Subject: [rebel-builders] Brake cylinders


Does anyone know what brake cylinders MAM used when distributing with the
moose? I want to add 2 to the co pilot side and I'm not sure if Spruce has
them or someone else.

Thanks
Kelly (Moose)
kelly@tru-form.ca
Enjoy your day !






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Fred Messinger (fredm)]

Hi Dick - me too! fredmessinger@gmail.com

Thanks,
Fred

On Fri, Apr 1, 2011 at 3:21 PM, Dick Wampach <rwampach@att.net> wrote:

Kelly Your E address bounced, please send it to me direct. I will then try
again.

Also will include Curtis Langholz c120pilot@hotmail.com

Dick Wampach rwampach@att.net

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Kelly
M. Ewing
Sent: Thursday, March 31, 2011 3:52 PM
To: MAM email list
Subject: Re: [rebel-builders] Brake cylinders


That would be great, when you have time Dick. (Photos) I have order the
spruce parts and am doing the same thing.

Thanks again
Kelly
kelly@tru-form.ca
Enjoy your day !


-----Original Message-----
From: "Dick Wampach" <rwampach@att.net>
Sender: <mike.davis@dcsol.com>
Date: Thu, 31 Mar 2011 15:46:31
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Brake cylinders


I have added the Matco masters with fluid reservoirs to the right side and
ran the hoses in series from co-pilot to pilot then to a dual on/off
parking
brake valve, and on to the wheels. Source was Acft Spruce. I do have
photos if you want?

Dick Wampach SR-108 N331RW

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Kelly
M. Ewing
Sent: Thursday, March 31, 2011 10:15 AM
To: MAM email list
Subject: [rebel-builders] Brake cylinders


Does anyone know what brake cylinders MAM used when distributing with the
moose? I want to add 2 to the co pilot side and I'm not sure if Spruce has
them or someone else.

Thanks
Kelly (Moose)
kelly@tru-form.ca
Enjoy your day !






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Rick Johnson]

Ditto: ricka10@msn.com'

Thanks,

Rick

Date: Fri, 1 Apr 2011 18:53:13 -0400
Subject: Re: [rebel-builders] Brake cylinders photos
From: fredmessinger@gmail.com
To: rebel-builders@dcsol.com

Hi Dick - me too! fredmessinger@gmail.com

Thanks,
Fred

On Fri, Apr 1, 2011 at 3:21 PM, Dick Wampach <rwampach@att.net> wrote:

Kelly Your E address bounced, please send it to me direct. I will then try
again.

Also will include Curtis Langholz c120pilot@hotmail.com

Dick Wampach rwampach@att.net

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Kelly
M. Ewing
Sent: Thursday, March 31, 2011 3:52 PM
To: MAM email list
Subject: Re: [rebel-builders] Brake cylinders


That would be great, when you have time Dick. (Photos) I have order the
spruce parts and am doing the same thing.

Thanks again
Kelly
kelly@tru-form.ca
Enjoy your day !


-----Original Message-----
From: "Dick Wampach" <rwampach@att.net>
Sender: <mike.davis@dcsol.com>
Date: Thu, 31 Mar 2011 15:46:31
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Brake cylinders


I have added the Matco masters with fluid reservoirs to the right side and
ran the hoses in series from co-pilot to pilot then to a dual on/off
parking
brake valve, and on to the wheels. Source was Acft Spruce. I do have
photos if you want?

Dick Wampach SR-108 N331RW

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Kelly
M. Ewing
Sent: Thursday, March 31, 2011 10:15 AM
To: MAM email list
Subject: [rebel-builders] Brake cylinders


Does anyone know what brake cylinders MAM used when distributing with the
moose? I want to add 2 to the co pilot side and I'm not sure if Spruce has
them or someone else.

Thanks
Kelly (Moose)
kelly@tru-form.ca
Enjoy your day !






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Dick Wampach]

Hi guys, I love sharing ...but who else wants information on my SR-3500
brake pedal set-up.
Please let me know and I will try one more mailing on about Monday

Dick Wampach SR-108 N331RW


Ditto: ricka10@msn.com'

Thanks,

Rick

Hi Dick - me too! fredmessinger@gmail.com

Also will include Curtis Langholz c120pilot@hotmail.com

kelly@tru-form.ca

From: "Dick Wampach" <rwampach@att.net>

I have added the Matco masters with fluid reservoirs to the right

side and ran the hoses in series from co-pilot to pilot then to a
dual on/off parking brake valve, and on to the wheels. Source was
Acft Spruce. I do have photos if you want?

Dick Wampach SR-108 N331RW

Does anyone know what brake cylinders MAM used when distributing
with the moose? I want to add 2 to the co pilot side and I'm not
sure if Spruce has them or someone else.

Thanks
Kelly (Moose)
kelly@tru-form.ca
Enjoy your day !

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Lynn Cole]

I would like to see the photos, even though I'm building an Elite
rather than a SR.
Lynn Cole
Murphy Elite #709
LynnCole@foxvalley.net



On Apr 1, 2011, at 8:06 PM, Dick Wampach wrote:

Hi guys, I love sharing ...but who else wants information on my
SR-3500
brake pedal set-up.
Please let me know and I will try one more mailing on about Monday

Dick Wampach SR-108 N331RW


Ditto: ricka10@msn.com'

Thanks,

Rick

Hi Dick - me too! fredmessinger@gmail.com

Also will include Curtis Langholz c120pilot@hotmail.com

kelly@tru-form.ca

From: "Dick Wampach" <rwampach@att.net>

I have added the Matco masters with fluid reservoirs to the right

side and ran the hoses in series from co-pilot to pilot then to a
dual on/off parking brake valve, and on to the wheels. Source was
Acft Spruce. I do have photos if you want?

Dick Wampach SR-108 N331RW

Does anyone know what brake cylinders MAM used when distributing
with the moose? I want to add 2 to the co pilot side and I'm not
sure if Spruce has them or someone else.

Thanks
Kelly (Moose)
kelly@tru-form.ca
Enjoy your day !

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Tim Saxton]

Dick, I'd also like to see the photos of the brake petal setup.

Thanks,
Tim
SR060

----- Original Message -----
From: "Dick Wampach" <rwampach@att.net>
To: <rebel-builders@dcsol.com>
Sent: Friday, April 01, 2011 6:06 PM
Subject: RE: [rebel-builders] Brake cylinders photos

Hi guys, I love sharing ...but who else wants information on my SR-3500
brake pedal set-up.
Please let me know and I will try one more mailing on about Monday

Dick Wampach SR-108 N331RW

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Ron Shannon]

--[PHOTOS WILL BE POSTED]--

No need to make more individual requests folks. I've offered to help Dick
post his photos to the web site and he's putting them together for me to do
that. When they're up, I'll notify the group, of course.

Ron
N254MR




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Ron Shannon]

Ten (10) photos of Dick's dual brake system have just been uploaded to
Files, SR-Moose, 123. S/M-Miscellaneous