Page 1 of 1

[rebel-builders] Stewart Systems Paint

Posted: Sun Feb 19, 2012 8:42 pm
by Mike Davis
Happens every year as Sun N Fun kicks off, and will likely remain quieter
than normal until after Airventure.

Mike

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of craig
Sent: Tuesday, March 29, 2011 9:53 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Stewart Systems Paint

Man, this list is very quiet! I hope it's because everyone's either flying
or building.

I bit of info I just learned regarding the Stewart Systems paint, which I am
very impressed with, BTW. Apparently their paint and all catylized paints
will bond to plastic as they are curing. I'm sure you can figure out why I
know this. So, if you use it, mask with paper and also don't cover your
freshly painted two days earlier wings with a pice of plastic to protect
them from overspray. The two will mate! It makes a cloudy place on the
paint and I'm not sure if it can be buffed out or not. Happy
Building/Flying CW







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------