Spring Gear Fairings
Posted: Fri Feb 17, 2012 4:21 pm
Received: from FLYBOY.MSCOMM.COM (annex565.mscomm.com [205.227.95.85])
by victor1.mscomm.com (8.8.8/8.8.5) with SMTP id HAA02989
for <murphy-rebel@dcsol.com>; Thu, 4 Jun 1998 07:47:12 -0700 (PDT)
Message-ID: <3576B1D2.76DA@mscomm.com>
Date: Thu, 04 Jun 1998 07:40:18 -0700
From: RICHARD BARTMAN <flyboy@mscomm.com>
Reply-To: flyboy@mscomm.com
X-Mailer: Mozilla 3.04Gold (Win95; I)
MIME-Version: 1.0
To: murphy-rebel@dcsol.com
Subject: Spring Gear Fairings
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Does any body know how the Murphy spring gear fairings are suppose to
fit?
I assume that the vertical part is suppose to screw to the side of the
fus. I started to cut a notch for the gear leg but the inboard edge
started to rub against the gear and bolt head before I could get enough
lap on the side of the fus. Tech support say to insert the bolt from the
bottom (opposite the instructions) but I still can not get it to fit.
Ant one have a photo?
Rich
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
by victor1.mscomm.com (8.8.8/8.8.5) with SMTP id HAA02989
for <murphy-rebel@dcsol.com>; Thu, 4 Jun 1998 07:47:12 -0700 (PDT)
Message-ID: <3576B1D2.76DA@mscomm.com>
Date: Thu, 04 Jun 1998 07:40:18 -0700
From: RICHARD BARTMAN <flyboy@mscomm.com>
Reply-To: flyboy@mscomm.com
X-Mailer: Mozilla 3.04Gold (Win95; I)
MIME-Version: 1.0
To: murphy-rebel@dcsol.com
Subject: Spring Gear Fairings
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Does any body know how the Murphy spring gear fairings are suppose to
fit?
I assume that the vertical part is suppose to screw to the side of the
fus. I started to cut a notch for the gear leg but the inboard edge
started to rub against the gear and bolt head before I could get enough
lap on the side of the fus. Tech support say to insert the bolt from the
bottom (opposite the instructions) but I still can not get it to fit.
Ant one have a photo?
Rich
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------