The Murphy Builders Site

For builders of Murphy Aircraft Manufacturing kits - Bringing builders together
https://www.murphybuilders.net/

[rebel-builders] SR/Moose rudder springs

https://www.murphybuilders.net/viewtopic.php?f=1&t=11492

Page 1 of 1

[rebel-builders] SR/Moose rudder springs

Posted: Sun Feb 19, 2012 8:34 pm
by Ted Waltman
Springs are in tension all the time (once you get the rudder cables
run/connected that is). Add inspection/access plate in bottom skin to
access these springs/attach points (pic posted to archive area 124 S/M
Modifications) or you will really hate yourself later.

Ted

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jason
Beall
Sent: Monday, December 13, 2010 6:20 PM
To: new list server
Subject: [rebel-builders] SR/Moose rudder springs

Guys,

Quick question about the springs (part no 311-606) that go from the rudder
pedal control horn back to the front web of the gear box: should they be in
tension at all times, or only when the horn goes forward (i.e. when the
pedals comes back)?

If anyone has an pics of how they have hooked the springs up I would sure
appreciate emailing them or uploading to the site. The rudder control system
is poorly covered in the manual.

Thanks, -Jason






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] SR/Moose rudder springs

Posted: Sun Feb 19, 2012 8:34 pm
by Jason Beall
Thanks Ted. -Jason

--- On Mon, 12/13/10, Ted Waltman <ted@vafm.org> wrote:

[quote]From: Ted Waltman <ted@vafm.org>
Subject: RE: [rebel-builders] SR/Moose rudder springs
To: rebel-builders@dcsol.com
Date: Monday, December 13, 2010, 5:52 PM
Springs are in tension all the time
(once you get the rudder cables
run/connected that is).

[rebel-builders] SR/Moose rudder springs

Posted: Sun Feb 19, 2012 8:34 pm
by lawsondj
Ted,


The pic you posted to the archive on this subject, shows a piano hinge along the
lower edge of the firewall flange. What is this hinge used for? Is it used to attach a
section of the cowl or for a control flap for air exhaust below the firewall flange area?
Thanks,


Jack, SR193

----- Original Message -----
From: "Ted Waltman" <ted@vafm.org>
To: rebel-builders@dcsol.com
Sent: Monday, December 13, 2010 5:52:23 PM
Subject: RE: [rebel-builders] SR/Moose rudder springs

Springs are in tension all the time (once you get the rudder cables
run/connected that is). Add inspection/access plate in bottom skin to
access these springs/attach points (pic posted to archive area 124 S/M
Modifications) or you will really hate yourself later.

Ted

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jason
Beall
Sent: Monday, December 13, 2010 6:20 PM
To: new list server
Subject: [rebel-builders] SR/Moose rudder springs

Guys,

Quick question about the springs (part no 311-606) that go from the rudder
pedal control horn back to the front web of the gear box: should they be in
tension at all times, or only when the horn goes forward (i.e. when the
pedals comes back)?

If anyone has an pics of how they have hooked the springs up I would sure
appreciate emailing them or uploading to the site. The rudder control system
is poorly covered in the manual.

Thanks, -Jason






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] SR/Moose rudder springs

Posted: Sun Feb 19, 2012 8:34 pm
by Ted Waltman
That's for my cowl flap Jack.

Ted

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
lawsondj@comcast.net
Sent: Saturday, December 18, 2010 11:58 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] SR/Moose rudder springs

Ted,


The pic you posted to the archive on this subject, shows a piano hinge along
the
lower edge of the firewall flange. What is this hinge used for? Is it used
to attach a
section of the cowl or for a control flap for air exhaust below the firewall
flange area?
Thanks,


Jack, SR193

----- Original Message -----
From: "Ted Waltman" <ted@vafm.org>
To: rebel-builders@dcsol.com
Sent: Monday, December 13, 2010 5:52:23 PM
Subject: RE: [rebel-builders] SR/Moose rudder springs

Springs are in tension all the time (once you get the rudder cables
run/connected that is). Add inspection/access plate in bottom skin to
access these springs/attach points (pic posted to archive area 124 S/M
Modifications) or you will really hate yourself later.

Ted

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jason
Beall
Sent: Monday, December 13, 2010 6:20 PM
To: new list server
Subject: [rebel-builders] SR/Moose rudder springs

Guys,

Quick question about the springs (part no 311-606) that go from the rudder
pedal control horn back to the front web of the gear box: should they be in
tension at all times, or only when the horn goes forward (i.e. when the
pedals comes back)?

If anyone has an pics of how they have hooked the springs up I would sure
appreciate emailing them or uploading to the site. The rudder control system

is poorly covered in the manual.

Thanks, -Jason






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
All times are UTC-08:00
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/