brake geometry
Posted: Sun Feb 19, 2012 8:07 pm
Just to add my 2 cents - --
My early model SR-2500 has the factory supplied dual brakes. The only modification was to mount the two brake cylinders to the floor (an early bulletin). Have had no problems with brake pedals in over 3 years of operation.
Charlie Starr N96CS
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
My early model SR-2500 has the factory supplied dual brakes. The only modification was to mount the two brake cylinders to the floor (an early bulletin). Have had no problems with brake pedals in over 3 years of operation.
Charlie Starr N96CS
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------