[rebel-builders] SR/Moose aileron-flap horn bellcrank and CC-140 paint
Posted: Sun Feb 19, 2012 8:06 pm
Thanks Ted. -Jason
--- On Mon, 11/22/10, Ted Waltman <ted@vafm.org> wrote:
[quote]From: Ted Waltman <ted@vafm.org>
Subject: RE: [rebel-builders] SR/Moose aileron-flap horn bellcrank and CC-140 paint
To: rebel-builders@dcsol.com
Date: Monday, November 22, 2010, 2:24 PM
I was at the hangar earlier, but now
won't be until well after Thanksgiving,
so, sorry, can't measure aileron side-to-side.
I'd suggest sanding some of the black paint off your
CC-140's...
Ted
-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]
On Behalf Of Jason
Beall
Sent: Monday, November 22, 2010 1:02 PM
To: new list server
Subject: [rebel-builders] SR/Moose aileron-flap horn
bellcrank and CC-140
paint
Folks,
Can someone tell me either:
1)How many degrees either way your aileron-flap horn
bellcrank in the
ceiling of your SR/Moose moves when you move your stick
back and forth,
or..
2)how many inches from side-to-side your horn moves back
and forth where the
aileron cables attach?
I'm just looking for an approximate measurement. I don't
have my wings
fitted just yet and I want to make sure everything in the
roof looks good.
Second question: My CC-140s control horns have a thick coat
of black paint
on them. I'm debating whether or not I want to open up my
delrin bushings a
few thou with my lathe, or sand the paint off the horns.
Any thoughts?
Thanks, -Jason
--- On Mon, 11/22/10, Ted Waltman <ted@vafm.org> wrote:
[quote]From: Ted Waltman <ted@vafm.org>
Subject: RE: [rebel-builders] SR/Moose aileron-flap horn bellcrank and CC-140 paint
To: rebel-builders@dcsol.com
Date: Monday, November 22, 2010, 2:24 PM
I was at the hangar earlier, but now
won't be until well after Thanksgiving,
so, sorry, can't measure aileron side-to-side.
I'd suggest sanding some of the black paint off your
CC-140's...
Ted
-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]
On Behalf Of Jason
Beall
Sent: Monday, November 22, 2010 1:02 PM
To: new list server
Subject: [rebel-builders] SR/Moose aileron-flap horn
bellcrank and CC-140
paint
Folks,
Can someone tell me either:
1)How many degrees either way your aileron-flap horn
bellcrank in the
ceiling of your SR/Moose moves when you move your stick
back and forth,
or..
2)how many inches from side-to-side your horn moves back
and forth where the
aileron cables attach?
I'm just looking for an approximate measurement. I don't
have my wings
fitted just yet and I want to make sure everything in the
roof looks good.
Second question: My CC-140s control horns have a thick coat
of black paint
on them. I'm debating whether or not I want to open up my
delrin bushings a
few thou with my lathe, or sand the paint off the horns.
Any thoughts?
Thanks, -Jason