[rebel-builders] SR/Moose aileron-flap horn bellcrank and CC-140 paint
Posted: Sun Feb 19, 2012 8:06 pm
I was at the hangar earlier, but now won't be until well after Thanksgiving,
so, sorry, can't measure aileron side-to-side.
I'd suggest sanding some of the black paint off your CC-140's...
Ted
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jason
Beall
Sent: Monday, November 22, 2010 1:02 PM
To: new list server
Subject: [rebel-builders] SR/Moose aileron-flap horn bellcrank and CC-140
paint
Folks,
Can someone tell me either:
1)How many degrees either way your aileron-flap horn bellcrank in the
ceiling of your SR/Moose moves when you move your stick back and forth,
or..
2)how many inches from side-to-side your horn moves back and forth where the
aileron cables attach?
I'm just looking for an approximate measurement. I don't have my wings
fitted just yet and I want to make sure everything in the roof looks good.
Second question: My CC-140s control horns have a thick coat of black paint
on them. I'm debating whether or not I want to open up my delrin bushings a
few thou with my lathe, or sand the paint off the horns. Any thoughts?
Thanks, -Jason
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
so, sorry, can't measure aileron side-to-side.
I'd suggest sanding some of the black paint off your CC-140's...
Ted
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jason
Beall
Sent: Monday, November 22, 2010 1:02 PM
To: new list server
Subject: [rebel-builders] SR/Moose aileron-flap horn bellcrank and CC-140
paint
Folks,
Can someone tell me either:
1)How many degrees either way your aileron-flap horn bellcrank in the
ceiling of your SR/Moose moves when you move your stick back and forth,
or..
2)how many inches from side-to-side your horn moves back and forth where the
aileron cables attach?
I'm just looking for an approximate measurement. I don't have my wings
fitted just yet and I want to make sure everything in the roof looks good.
Second question: My CC-140s control horns have a thick coat of black paint
on them. I'm debating whether or not I want to open up my delrin bushings a
few thou with my lathe, or sand the paint off the horns. Any thoughts?
Thanks, -Jason
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------