The Murphy Builders Site

Digest of list: rebel-builders-d Total messages in digest: 28

1 Date : Wed, 10 Nov 2010 16:30:07 -0800
From : mfjrebel007r@cogeco.ca
Subject: RE: [rebel-builders] O-320 Exhaust valve guide wear

2 Date : Wed, 10 Nov 2010 19:39:21 -0500
From : oifa@irishfield.on.ca
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

3 Date : Wed, 10 Nov 2010 16:45:43 -0800
From : rshannon@cruzcom.com
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

4 Date : Wed, 10 Nov 2010 18:48:23 -0600
From : charlie@troyairpark.com
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

5 Date : Wed, 10 Nov 2010 17:23:00 -0800 (PST)
From : im_planecrazy@yahoo.com
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

6 Date : Wed, 10 Nov 2010 20:29:59 -0500
From : oifa@irishfield.on.ca
Subject: Re: [rebel-builders] Daughter with Cancer..

7 Date : Wed, 10 Nov 2010 19:02:54 -0800
From : mfjrebel007r@cogeco.ca
Subject: RE: [rebel-builders] Daughter with Cancer..

8 Date : Wed, 10 Nov 2010 18:50:10 -0900
From : allen.hewko@dcsol.com
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

9 Date : Wed, 10 Nov 2010 22:52:41 -0500
From : bobp@prosumers.ca
Subject: Next Murphy Builders Meeting - THIS Sunday, Nov. 14th !

10 Date : Wed, 10 Nov 2010 23:09:07 -0500
From : oifa@irishfield.on.ca
Subject: Re: [rebel-builders] Next Murphy Builders Meeting - THIS
Sunday, Nov. 1

11 Date : Wed, 10 Nov 2010 19:15:03 -0900
From : allen.hewko@dcsol.com
Subject: RE: Catto props

12 Date : Wed, 10 Nov 2010 23:33:11 -0500
From : bobp@prosumers.ca
Subject: Re: [rebel-builders] Next Murphy Builders Meeting - THIS
Sunday, Nov. 1

13 Date : Wed, 10 Nov 2010 21:14:38 -0900
From : kpierson@dcsol.com
Subject: RE: Catto props

14 Date : Wed, 10 Nov 2010 22:06:25 -0900
From : snowyrvr@mtaonline.net
Subject: Rebel PArts Needed

15 Date : Thu, 11 Nov 2010 08:08:48 -0500
From : jbcressman@aol.com
Subject: Re: [rebel-builders] Daughter with Cancer..

16 Date : Thu, 11 Nov 2010 08:59:01 EST
From : rebflyer@aol.com
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

17 Date : Thu, 11 Nov 2010 09:20:11 -0500
From : oifa@irishfield.on.ca
Subject: Re: [rebel-builders] Daughter with Cancer..

18 Date : Thu, 11 Nov 2010 09:04:57 -0600
From : siksc37@gmail.com
Subject: Re: [rebel-builders] Daughter with Cancer..

19 Date : Thu, 11 Nov 2010 11:53:44 -0500
From : dale.kilbey@persona.ca
Subject: Re: [rebel-builders] Daughter with Cancer..

20 Date : Thu, 11 Nov 2010 07:56:35 -0900
From : srwhitenect@dcsol.com
Subject: C-FJCI

21 Date : Thu, 11 Nov 2010 11:58:23 -0500
From : oifa@irishfield.on.ca
Subject: Re: [rebel-builders] Daughter with Cancer..

22 Date : Thu, 11 Nov 2010 12:04:14 -0500
From : dale.kilbey@persona.ca
Subject: Re owering up strobes

23 Date : Thu, 11 Nov 2010 09:44:53 -0800
From : rwampach@att.net
Subject: RE: [rebel-builders] C-FJCI

24 Date : Thu, 11 Nov 2010 09:16:52 -0900
From : srwhitenect@dcsol.com
Subject: RE: [rebel-builders] C-FJCI

25 Date : Thu, 11 Nov 2010 15:26:52 -0500
From : kriening@rogers.com
Subject: Gord Mohr Landing Gear Bushings ?

26 Date : Thu, 11 Nov 2010 15:58:45 -0500
From : oifa@irishfield.on.ca
Subject: Re: [rebel-builders] Gord Mohr Landing Gear Bushings ?

27 Date : Thu, 11 Nov 2010 12:09:17 -0900
From : snowyrvr@mtaonline.net
Subject: Re: [rebel-builders] Daughter with Cancer..

28 Date : Thu, 11 Nov 2010 17:31:22 -0400
From : lopeco.eduardo@gmail.com
Subject: RE: [rebel-builders] O-320 Exhaust valve guide wear


---------- Digest Message #1 ----------
Date: Wed, 10 Nov 2010 16:30:07 -0800
From: mfjrebel007r@cogeco.ca
To: rebel-builders
Subject: RE: [rebel-builders] O-320 Exhaust valve guide wear

You got the luck of the irish on your side
Good to hear all is fixed and done

Cheers

Mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne
G. O'Shea
Sent: Wednesday, November 10, 2010 3:40 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

Just to complete the story... it turned out that #4 had a cracked exhaust
valve head to boot. My engine guy figures I should go buy a lottery ticket
as it was probably no more than a few hours from letting go and costing
MUCH

more money! Catastrophic money...

So I had him do all four cylinders... $1072 and I supplied a new exhaust
valve that I had in spares. All cylinders pressure checked for cracks....
valves/seat faces redone and new exhaust guides and install gasket sets.
Of
course it took 3x longer to put it all back together than it did to rip it
apart.. but man what a difference. I thought it was my technique or
something that sucked all summer.. but it was just lack of power. Test
flew
her this afternoon and grass take off cut in half compared to leaving in
June and climb up from 800 fpm to 1100fpm. Things that make you go.. "why
didn't I look at it a little more seriously".

http://www.irishfield.on.ca/gallery/valve1.jpg

http://www.irishfield.on.ca/gallery/valve2.jpg

http://www.irishfield.on.ca/gallery/valve3.jpg

Wayne

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: "Murphy Rebel Builders List" <rebel-builders@dcsol.com>
Sent: Friday, October 15, 2010 8:56 PM
Subject: [rebel-builders] O-320 Exhaust valve guide wear

Not how I like spending my Friday afternoons!

http://www.irishfield.on.ca/gallery/engine1.jpg

http://www.irishfield.on.ca/gallery/engine2.jpg

http://www.irishfield.on.ca/gallery/engine3.jpg

215 hours SMOH... run on nothing but 100LL. #4 was down to 58/80.... all
leakage air blowing (roaring) out the exhaust. Was going to try the rope
trick for a valve seat lap, and I started into that and got the springs
removed..... only to find that the exhaust valve to guide clearnance was
like throwing a wiener down a hallway.

Was told if one was that way..they probably all were, so I put the # 4
back
together to get an indication of how much the valve stem moved with the
spring/keepers installed and sure enough they are all about the same. Off
to
the engine shop tomorrow for new guides and possibly valves. Thankfully I
have a couple sets of valves... so I know they won't be needed!

Wayne




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




---------- Digest Message #2 ----------
Date: Wed, 10 Nov 2010 19:39:21 -0500
From: oifa@irishfield.on.ca
To: rebel-builders
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

Thanks Mike.. we're sure hoping we have the luck of the Irish on our side
for the next battle in the family as well.... our 25 year old daughter
Jennifer, just diagnosed with Ewing's Sarcoma in her right pelvic bone.
One
of the rare bone cancers with only 40 or so diagnosis' a year in Canada vs
the tens of thousands of other cancers..... starts Chemo on Monday. Gonna
be
a rough haul for her.. at a current 96lbs.. but she'll beat it !

Wayne

----- Original Message -----
From: "mike jones" <mfjrebel007r@cogeco.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 10, 2010 7:30 PM
Subject: RE: [rebel-builders] O-320 Exhaust valve guide wear

You got the luck of the irish on your side
Good to hear all is fixed and done

Cheers

Mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne
G. O'Shea
Sent: Wednesday, November 10, 2010 3:40 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

Just to complete the story... it turned out that #4 had a cracked exhaust
valve head to boot. My engine guy figures I should go buy a lottery
ticket
as it was probably no more than a few hours from letting go and costing
MUCH

more money! Catastrophic money...

So I had him do all four cylinders... $1072 and I supplied a new exhaust
valve that I had in spares. All cylinders pressure checked for cracks....
valves/seat faces redone and new exhaust guides and install gasket sets.
Of
course it took 3x longer to put it all back together than it did to rip
it
apart.. but man what a difference. I thought it was my technique or
something that sucked all summer.. but it was just lack of power. Test
flew
her this afternoon and grass take off cut in half compared to leaving in
June and climb up from 800 fpm to 1100fpm. Things that make you go.. "why
didn't I look at it a little more seriously".

http://www.irishfield.on.ca/gallery/valve1.jpg

http://www.irishfield.on.ca/gallery/valve2.jpg

http://www.irishfield.on.ca/gallery/valve3.jpg

Wayne

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: "Murphy Rebel Builders List" <rebel-builders@dcsol.com>
Sent: Friday, October 15, 2010 8:56 PM
Subject: [rebel-builders] O-320 Exhaust valve guide wear

Not how I like spending my Friday afternoons!

http://www.irishfield.on.ca/gallery/engine1.jpg

http://www.irishfield.on.ca/gallery/engine2.jpg

http://www.irishfield.on.ca/gallery/engine3.jpg

215 hours SMOH... run on nothing but 100LL. #4 was down to 58/80.... all
leakage air blowing (roaring) out the exhaust. Was going to try the rope
trick for a valve seat lap, and I started into that and got the springs
removed..... only to find that the exhaust valve to guide clearnance was
like throwing a wiener down a hallway.

Was told if one was that way..they probably all were, so I put the # 4
back
together to get an indication of how much the valve stem moved with the
spring/keepers installed and sure enough they are all about the same.
Off
to
the engine shop tomorrow for new guides and possibly valves. Thankfully
I
have a couple sets of valves... so I know they won't be needed!

Wayne




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

---------- Digest Message #3 ----------
Date: Wed, 10 Nov 2010 16:45:43 -0800
From: rshannon@cruzcom.com
To: rebel-builders
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

Sorry to hear that news, Wayne. We will be pulling for her too.

Ron


On Wed, Nov 10, 2010 at 4:39 PM, Wayne G. O'Shea
<oifa@irishfield.on.ca>wrote:

Thanks Mike.. we're sure hoping we have the luck of the Irish on our side
for the next battle in the family as well.... our 25 year old daughter
Jennifer, just diagnosed with Ewing's Sarcoma in her right pelvic bone.
One
of the rare bone cancers with only 40 or so diagnosis' a year in Canada
vs
the tens of thousands of other cancers..... starts Chemo on Monday. Gonna
be
a rough haul for her.. at a current 96lbs.. but she'll beat it !

Wayne

---------- Digest Message #4 ----------
Date: Wed, 10 Nov 2010 18:48:23 -0600
From: charlie@troyairpark.com
To: rebel-builders
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

Bless her Lord, we will keep her in our prayers.
Charlie
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 10, 2010 6:39 PM
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

Thanks Mike.. we're sure hoping we have the luck of the Irish on our side
for the next battle in the family as well.... our 25 year old daughter
Jennifer, just diagnosed with Ewing's Sarcoma in her right pelvic bone.
One
of the rare bone cancers with only 40 or so diagnosis' a year in Canada
vs
the tens of thousands of other cancers..... starts Chemo on Monday. Gonna
be
a rough haul for her.. at a current 96lbs.. but she'll beat it !

Wayne

----- Original Message -----
From: "mike jones" <mfjrebel007r@cogeco.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 10, 2010 7:30 PM
Subject: RE: [rebel-builders] O-320 Exhaust valve guide wear

You got the luck of the irish on your side
Good to hear all is fixed and done

Cheers

Mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne
G. O'Shea
Sent: Wednesday, November 10, 2010 3:40 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

Just to complete the story... it turned out that #4 had a cracked
exhaust
valve head to boot. My engine guy figures I should go buy a lottery
ticket
as it was probably no more than a few hours from letting go and costing
MUCH

more money! Catastrophic money...

So I had him do all four cylinders... $1072 and I supplied a new exhaust
valve that I had in spares. All cylinders pressure checked for
cracks....
valves/seat faces redone and new exhaust guides and install gasket sets.
Of
course it took 3x longer to put it all back together than it did to rip
it
apart.. but man what a difference. I thought it was my technique or
something that sucked all summer.. but it was just lack of power. Test
flew
her this afternoon and grass take off cut in half compared to leaving in
June and climb up from 800 fpm to 1100fpm. Things that make you go..
"why
didn't I look at it a little more seriously".

http://www.irishfield.on.ca/gallery/valve1.jpg

http://www.irishfield.on.ca/gallery/valve2.jpg

http://www.irishfield.on.ca/gallery/valve3.jpg

Wayne

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: "Murphy Rebel Builders List" <rebel-builders@dcsol.com>
Sent: Friday, October 15, 2010 8:56 PM
Subject: [rebel-builders] O-320 Exhaust valve guide wear




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

---------- Digest Message #5 ----------
Date: Wed, 10 Nov 2010 17:23:00 -0800 (PST)
From: im_planecrazy@yahoo.com
To: rebel-builders
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

My hopes and prayers go out to you and your family Wayne.
Keith

--- On Wed, 11/10/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear
To: rebel-builders@dcsol.com
Date: Wednesday, November 10, 2010, 6:39 PM


Thanks Mike.. we're sure hoping we have the luck of the Irish on our side
for the next battle in the family as well.... our 25 year old daughter
Jennifer, just diagnosed with Ewing's Sarcoma in her right pelvic bone.
One
of the rare bone cancers with only 40 or so diagnosis' a year in Canada vs
the tens of thousands of other cancers..... starts Chemo on Monday. Gonna
be
a rough haul for her.. at a current 96lbs.. but she'll beat it !

Wayne

----- Original Message -----
From: "mike jones" <mfjrebel007r@cogeco.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 10, 2010 7:30 PM
Subject: RE: [rebel-builders] O-320 Exhaust valve guide wear

You got the luck of the irish on your side
Good to hear all is fixed and done

Cheers

Mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne
G. O'Shea
Sent: Wednesday, November 10, 2010 3:40 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

Just to complete the story... it turned out that #4 had a cracked exhaust
valve head to boot. My engine guy figures I should go buy a lottery
ticket
as it was probably no more than a few hours from letting go and costing
MUCH

more money! Catastrophic money...

So I had him do all four cylinders... $1072 and I supplied a new exhaust
valve that I had in spares. All cylinders pressure checked for cracks....
valves/seat faces redone and new exhaust guides and install gasket sets.
Of
course it took 3x longer to put it all back together than it did to rip
it
apart.. but man what a difference. I thought it was my technique or
something that sucked all summer.. but it was just lack of power. Test
flew
her this afternoon and grass take off cut in half compared to leaving in
June and climb up from 800 fpm to 1100fpm. Things that make you go.. "why
didn't I look at it a little more seriously".

http://www.irishfield.on.ca/gallery/valve1.jpg

http://www.irishfield.on.ca/gallery/valve2.jpg

http://www.irishfield.on.ca/gallery/valve3.jpg

Wayne

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: "Murphy Rebel Builders List" <rebel-builders@dcsol.com>
Sent: Friday, October 15, 2010 8:56 PM
Subject: [rebel-builders] O-320 Exhaust valve guide wear

Not how I like spending my Friday afternoons!

http://www.irishfield.on.ca/gallery/engine1.jpg

http://www.irishfield.on.ca/gallery/engine2.jpg

http://www.irishfield.on.ca/gallery/engine3.jpg

215 hours SMOH... run on nothing but 100LL. #4 was down to 58/80.... all
leakage air blowing (roaring) out the exhaust. Was going to try the rope
trick for a valve seat lap, and I started into that and got the springs
removed..... only to find that the exhaust valve to guide clearnance was
like throwing a wiener down a hallway.

Was told if one was that way..they probably all were, so I put the # 4
back
together to get an indication of how much the valve stem moved with the
spring/keepers installed and sure enough they are all about the same.
Off
to
the engine shop tomorrow for new guides and possibly valves. Thankfully
I
have a couple sets of valves... so I know they won't be needed!

Wayne




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------








---------- Digest Message #6 ----------
Date: Wed, 10 Nov 2010 20:29:59 -0500
From: oifa@irishfield.on.ca
To: rebel-builders
Subject: Re: [rebel-builders] Daughter with Cancer..

Thanks Keith, and everyone!

Wayne

----- Original Message -----
From: "Keith Leitch" <im_planecrazy@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 10, 2010 8:23 PM
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

My hopes and prayers go out to you and your family Wayne.
Keith

--- On Wed, 11/10/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear
To: rebel-builders@dcsol.com
Date: Wednesday, November 10, 2010, 6:39 PM


Thanks Mike.. we're sure hoping we have the luck of the Irish on our side
for the next battle in the family as well.... our 25 year old daughter
Jennifer, just diagnosed with Ewing's Sarcoma in her right pelvic bone.
One
of the rare bone cancers with only 40 or so diagnosis' a year in Canada
vs
the tens of thousands of other cancers..... starts Chemo on Monday. Gonna
be
a rough haul for her.. at a current 96lbs.. but she'll beat it !

Wayne

----- Original Message -----
From: "mike jones" <mfjrebel007r@cogeco.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 10, 2010 7:30 PM
Subject: RE: [rebel-builders] O-320 Exhaust valve guide wear

You got the luck of the irish on your side
Good to hear all is fixed and done

Cheers

Mike#007

---------- Digest Message #7 ----------
Date: Wed, 10 Nov 2010 19:02:54 -0800
From: mfjrebel007r@cogeco.ca
To: rebel-builders
Subject: RE: [rebel-builders] Daughter with Cancer..

Will pray for her wayne
All the best
Hope the wife is doing well too
cheers

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne
G. O'Shea
Sent: Wednesday, November 10, 2010 5:30 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Daughter with Cancer..

Thanks Keith, and everyone!

Wayne

----- Original Message -----
From: "Keith Leitch" <im_planecrazy@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 10, 2010 8:23 PM
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

My hopes and prayers go out to you and your family Wayne.
Keith

--- On Wed, 11/10/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear
To: rebel-builders@dcsol.com
Date: Wednesday, November 10, 2010, 6:39 PM


Thanks Mike.. we're sure hoping we have the luck of the Irish on our side
for the next battle in the family as well.... our 25 year old daughter
Jennifer, just diagnosed with Ewing's Sarcoma in her right pelvic bone.
One
of the rare bone cancers with only 40 or so diagnosis' a year in Canada
vs
the tens of thousands of other cancers..... starts Chemo on Monday. Gonna
be
a rough haul for her.. at a current 96lbs.. but she'll beat it !

Wayne

----- Original Message -----
From: "mike jones" <mfjrebel007r@cogeco.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 10, 2010 7:30 PM
Subject: RE: [rebel-builders] O-320 Exhaust valve guide wear

You got the luck of the irish on your side
Good to hear all is fixed and done

Cheers

Mike#007

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




---------- Digest Message #8 ----------
Date: Wed, 10 Nov 2010 18:50:10 -0900
From: allen.hewko@dcsol.com
To: oifa@irishfield.on.ca
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

She will be in our thoughts and prayers.
Allen H.

On 11/10/2010 3:39 PM, oifa@irishfield.on.ca wrote to rebel-builders:

-> Thanks Mike.. we're sure hoping we have the luck of the Irish on our
side
-> for the next battle in the family as well.... our 25 year old daughter
-> Jennifer, just diagnosed with Ewing's Sarcoma in her right pelvic bone.
One
-> of the rare bone cancers with only 40 or so diagnosis' a year in Canada
vs
-> the tens of thousands of other cancers..... starts Chemo on Monday.
Gonna be
-> a rough haul for her.. at a current 96lbs.. but she'll beat it !
->
-> Wayne
->
-> ----- Original Message -----
-> From: "mike jones" <mfjrebel007r@cogeco.ca>
-> To: <rebel-builders@dcsol.com>
-> Sent: Wednesday, November 10, 2010 7:30 PM
-> Subject: RE: [rebel-builders] O-320 Exhaust valve guide wear
->
->
-> > You got the luck of the irish on your side
-> > Good to hear all is fixed and done
-> >
-> > Cheers
-> >
-> > Mike#007
-> >
-> > -----Original Message-----
-> > From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf
Of
-> > Wayne
-> > G. O'Shea
-> > Sent: Wednesday, November 10, 2010 3:40 PM
-> > To: rebel-builders@dcsol.com
-> > Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear
-> >
-> > Just to complete the story... it turned out that #4 had a cracked
exhaust
-> > valve head to boot. My engine guy figures I should go buy a lottery
ticket
-> > as it was probably no more than a few hours from letting go and
costing
-> > MUCH
-> >
-> > more money! Catastrophic money...
-> >
-> > So I had him do all four cylinders... $1072 and I supplied a new
exhaust
-> > valve that I had in spares. All cylinders pressure checked for
cracks....
-> > valves/seat faces redone and new exhaust guides and install gasket
sets.
-> > Of
-> > course it took 3x longer to put it all back together than it did to
rip it
-> > apart.. but man what a difference. I thought it was my technique or
-> > something that sucked all summer.. but it was just lack of power.
Test
-> > flew
-> > her this afternoon and grass take off cut in half compared to leaving
in
-> > June and climb up from 800 fpm to 1100fpm. Things that make you go..
"why
-> > didn't I look at it a little more seriously".
-> >
-> > http://www.irishfield.on.ca/gallery/valve1.jpg
-> >
-> > http://www.irishfield.on.ca/gallery/valve2.jpg
-> >
-> > http://www.irishfield.on.ca/gallery/valve3.jpg
-> >
-> > Wayne
-> >
-> > ----- Original Message -----
-> > From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
-> > To: "Murphy Rebel Builders List" <rebel-builders@dcsol.com>
-> > Sent: Friday, October 15, 2010 8:56 PM
-> > Subject: [rebel-builders] O-320 Exhaust valve guide wear
-> >
-> >
-> >> Not how I like spending my Friday afternoons!
-> >>
-> >> http://www.irishfield.on.ca/gallery/engine1.jpg
-> >>
-> >> http://www.irishfield.on.ca/gallery/engine2.jpg
-> >>
-> >> http://www.irishfield.on.ca/gallery/engine3.jpg
-> >>
-> >> 215 hours SMOH... run on nothing but 100LL. #4 was down to
58/80.... all
-> >> leakage air blowing (roaring) out the exhaust. Was going to try the
rope
-> >> trick for a valve seat lap, and I started into that and got the
springs
-> >> removed..... only to find that the exhaust valve to guide clearnance
was
-> >> like throwing a wiener down a hallway.
-> >>
-> >> Was told if one was that way..they probably all were, so I put the #
4
-> >> back
-> >> together to get an indication of how much the valve stem moved with
the
-> >> spring/keepers installed and sure enough they are all about the
same.
Off
-> >> to
-> >> the engine shop tomorrow for new guides and possibly valves.
Thankfully I
-> >> have a couple sets of valves... so I know they won't be needed!
-> >>
-> >> Wayne
-> >>
-> >>
-> >>
-> >>
-> >> -----------------------------------------------------------------
-> >> List archives located at: https://mail.dcsol.com/login
-> >> username "rebel" password "builder"
-> >> Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> >> List administrator: mike.davis@dcsol.com
-> >> -----------------------------------------------------------------
-> >>
-> >>
-> >>
-> >
-> >
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://mail.dcsol.com/login
-> > username "rebel" password "builder"
-> > Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://mail.dcsol.com/login
-> > username "rebel" password "builder"
-> > Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
-> >
->
->


---------- Digest Message #9 ----------
Date: Wed, 10 Nov 2010 22:52:41 -0500
From: bobp@prosumers.ca
To: rebel-builders
Subject: Next Murphy Builders Meeting - THIS Sunday, Nov. 14th !



It's that time again !!!

The next Murphy Builders of Ontario Meeting is Sunday, November 14th,
at 1:00 pm. at the RAA-TR Hangar at the north end of Brampton Airport.
====== ==========
(North-West of Toronto, Ontario, Canada) (CNC3)

*** Note the START TIME !! There's going to be a LOT of interesting
stuff to cover, so...... We will start at 1:15 , and
try to finish about 4:00 -- to make things easier for those
who fly in, or drive in from long distances ...

*************************************************************************
Bring those 'tech support questions' and some things for Show 'n Tell !
---------------------------------------------
We'll be in the hangar again - hope it warms up ! Dress warmly !!
(or maybe we can use the clubhouse again ... ;-) )

We hope the Black Sheep Rebel Squadron will be able to fly in
again - thanks for your support at the last meeting !

**********************************************************************
You don't want to miss all the fun, so PLEASE BE HERE for 1:00 !
**********************************************************************

We're going to continue the 'kit type' forum format for
this meeting, with Q & A. These forums are short 'mini-seminars' on
the different kits. Ken has kindly become leader of the Rebel forum,
and he always brings new and interesting information & gadgets. He
<may> bring his "Rebel Rubber Ducky" to the meeting again. We're
always look forward to his tips & tales of float building, and whatever
else he'll bring !

We're still hoping to see our first fly-in Moose for this meeting !
Sure hoping for good weather ... and a chance to check out a
flying Moose !

We're looking for experienced builders to volunteer
to lead the sessions for the Moose, Elite, etc., ideally on a regular
basis for all future meetings.

Maybe an Elite expert will make it to this meeting, OR -
we might even have a fly-in NEW Elite from Stoney Creek !! :-)
We also hope to see some of the new Rebels in Ontario ...
There's room for a Maverick section, too, if we have interest....

Who will be recognized as the builder who has
"Made the Most Progress Since the Last Meeting" ??
It's always a tough call, and now the building season is slowing -
- so be here for the introductions & progress updates !!

YOU could take home the Copper Cleco Trophy !

-- Who is next for this one ???

The trophies will be back,
...... so we can award one to YOU this time -
- IF you've been busy rivetting ! ;-)

Lots of news ! Come learn the latest on the NEXT Rebel Ramble -
we had to cancel this year -- trying again for 2011 !

Come learn the latest from the factory - things are moving again,
with production runs now on for Floats and Mooses !!

We REALLY hope the weather will be good, so we can see a
bunch of "Fly-In" Rebels/Elites/Meeses/whatevers !! The weather
channel is calling for rain, but we hope to get a good turnout anyway.

Don't take chances if it's raining -- better to DRIVE & arrive alive !!

If you do drive, you can join us for pizza & beer afterward !! ;-)

We'll also have some new guests & Rebel builders, and another
draw for Rebel crests...

As always, we'll have some useful software CDs to hand out
at the end, for those still suffering with/from Win-Doze ! :-)

Should be an interesting meeting !

Phone us for updates or directions - (905) 457-5238.

Hope to see you all there ! There is a lot of experience to share ...

----------------------------------------------------------------------

Free coke, spring water, coffee & donuts, as usual - everyone welcome !
(Even if you don't have a Rebel <yet> !) ;-)

We'll have tea, muffins, bagels, cream cheese, & jam, too !!

.....bobp & Anna

--------------------------------------------------------------

p.s. We usually go out for pizza & beer after the meeting - all welcome !

Next Meeting - Sunday, January 9th, 2011 !
---------------------------------------
------------

--------------------------------------
** Check out the Upcoming Events section at: www.PattersonAeroSales.com
**
You can download the agenda there ....
----------------------------------------------------------

--

......bobp
bobp@prosumers.ca
bobp@pattersys.com
http://www.Pattersys.com
http://www.amway.ca/BobPatterson


Any views expressed in this message are those of the individual sender
and do not necessarily reflect the views of any other entities or persons.
Any action taken as a result of the contents of this email is totally the
responsibility of the reader.


---------- Digest Message #10 ----------
Date: Wed, 10 Nov 2010 23:09:07 -0500
From: oifa@irishfield.on.ca
To: rebel-builders
Subject: Re: [rebel-builders] Next Murphy Builders Meeting - THIS Sunday,
Nov. 1

Have fun Bob ! We'll be down that way but not having the fun you guys will
!

Wayne

----- Original Message -----
From: "Bob Patterson" <bobp@prosumers.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 10, 2010 10:52 PM
Subject: [rebel-builders] Next Murphy Builders Meeting - THIS Sunday, Nov.
14th !

It's that time again !!!

The next Murphy Builders of Ontario Meeting is Sunday, November 14th,
at 1:00 pm. at the RAA-TR Hangar at the north end of Brampton Airport.
====== ==========
(North-West of Toronto, Ontario, Canada) (CNC3)

*** Note the START TIME !! There's going to be a LOT of interesting
stuff to cover, so...... We will start at 1:15 , and
try to finish about 4:00 -- to make things easier for those
who fly in, or drive in from long distances ...

*************************************************************************
Bring those 'tech support questions' and some things for Show 'n Tell !
---------------------------------------------
We'll be in the hangar again - hope it warms up ! Dress warmly !!
(or maybe we can use the clubhouse again ... ;-) )

We hope the Black Sheep Rebel Squadron will be able to fly in
again - thanks for your support at the last meeting !

**********************************************************************
You don't want to miss all the fun, so PLEASE BE HERE for 1:00 !
**********************************************************************

We're going to continue the 'kit type' forum format for
this meeting, with Q & A. These forums are short 'mini-seminars' on
the different kits. Ken has kindly become leader of the Rebel forum,
and he always brings new and interesting information & gadgets. He
<may> bring his "Rebel Rubber Ducky" to the meeting again. We're
always look forward to his tips & tales of float building, and whatever
else he'll bring !

We're still hoping to see our first fly-in Moose for this meeting !
Sure hoping for good weather ... and a chance to check out a
flying Moose !

We're looking for experienced builders to volunteer
to lead the sessions for the Moose, Elite, etc., ideally on a regular
basis for all future meetings.

Maybe an Elite expert will make it to this meeting, OR -
we might even have a fly-in NEW Elite from Stoney Creek !! :-)
We also hope to see some of the new Rebels in Ontario ...
There's room for a Maverick section, too, if we have interest....

Who will be recognized as the builder who has
"Made the Most Progress Since the Last Meeting" ??
It's always a tough call, and now the building season is slowing -
- so be here for the introductions & progress updates !!

YOU could take home the Copper Cleco Trophy !

-- Who is next for this one ???

The trophies will be back,
...... so we can award one to YOU this time -
- IF you've been busy rivetting ! ;-)

Lots of news ! Come learn the latest on the NEXT Rebel Ramble -
we had to cancel this year -- trying again for 2011 !

Come learn the latest from the factory - things are moving again,
with production runs now on for Floats and Mooses !!

We REALLY hope the weather will be good, so we can see a
bunch of "Fly-In" Rebels/Elites/Meeses/whatevers !! The weather
channel is calling for rain, but we hope to get a good turnout anyway.

Don't take chances if it's raining -- better to DRIVE & arrive alive
!!

If you do drive, you can join us for pizza & beer afterward !! ;-)

We'll also have some new guests & Rebel builders, and another
draw for Rebel crests...

As always, we'll have some useful software CDs to hand out
at the end, for those still suffering with/from Win-Doze ! :-)

Should be an interesting meeting !

Phone us for updates or directions - (905) 457-5238.

Hope to see you all there ! There is a lot of experience to share ...

----------------------------------------------------------------------

Free coke, spring water, coffee & donuts, as usual - everyone welcome !
(Even if you don't have a Rebel <yet> !) ;-)

We'll have tea, muffins, bagels, cream cheese, & jam, too !!

.....bobp & Anna

--------------------------------------------------------------

p.s. We usually go out for pizza & beer after the meeting - all welcome
!

Next Meeting - Sunday, January 9th, 2011 !
---------------------------------------
------------

--------------------------------------
** Check out the Upcoming Events section at: www.PattersonAeroSales.com
**
You can download the agenda there ....
----------------------------------------------------------

--

......bobp
bobp@prosumers.ca
bobp@pattersys.com
http://www.Pattersys.com
http://www.amway.ca/BobPatterson


Any views expressed in this message are those of the individual sender
and do not necessarily reflect the views of any other entities or
persons.
Any action taken as a result of the contents of this email is totally the
responsibility of the reader.




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

---------- Digest Message #11 ----------
Date: Wed, 10 Nov 2010 19:15:03 -0900
From: allen.hewko@dcsol.com
To: jessejenks@hotmail.com
Subject: RE: Catto props

I recently installed a Catto prop and went with 78" to give me a little
more
clearance when on skis. I started out with 45 pitch, and had to get
repitched
to 47.5, which is just right, about 2750 rpm WOT level flight. I have a
150 Lyc
with a Pmag electronic ignition, which is giving me more power than Craig
had calculated originally. Craig was great to deal with, the product is
excellent, and I would recommend his prop. I believe he just came out with
a
nickel leading edge as well.

Allen H.
R151


On 11/10/2010 7:31 AM, jessejenks@hotmail.com wrote to rebel-builders:

->
-> Hi guys, I'm contemplating a prop and right now I'm thinking of going
with
a Catto. I looked on the archives and there is only a little information
there.
Curt Martin has a 3 blade Catto that he loves. I wanted to go with a 2
blade
but not sure if I have enough ground clearance. Catto is suggesting a
diameter between 78"-82" and pitch from 42-46 (I have a 160hp O-320). I
don't quite have the engine hung yet to measure from prop flange to the
ground. I'm on 8.50 tires with Wayne's spring gear so I think I should be
OK
with a 78" prop anyway. Can anyone provide some data points on both prop
clearance with longer props and or Catto props on a Rebel?
-> Thanks much.
-> Jesse
->


---------- Digest Message #12 ----------
Date: Wed, 10 Nov 2010 23:33:11 -0500
From: bobp@prosumers.ca
To: rebel-builders
Subject: Re: [rebel-builders] Next Murphy Builders Meeting - THIS Sunday,
Nov. 1


Thanks Wayne !

We'll be thinking of you - wishing all the best !!

--

......bobp
bobp@prosumers.ca
bobp@pattersys.com
http://www.Pattersys.com
http://www.PattersonAeroSales.com
http://www.amway.ca/BobPatterson


Any views expressed in this message are those of the individual sender
and do not necessarily reflect the views of any other entities or persons.
Any action taken as a result of the contents of this email is totally the
responsibility of the reader.


On November 10, 2010 11:09:07 pm Wayne G. O'Shea wrote:

Have fun Bob ! We'll be down that way but not having the fun you guys
will
!

Wayne

----- Original Message -----
From: "Bob Patterson" <bobp@prosumers.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 10, 2010 10:52 PM
Subject: [rebel-builders] Next Murphy Builders Meeting - THIS Sunday,
Nov.
14th !

It's that time again !!!

The next Murphy Builders of Ontario Meeting is Sunday, November 14th,

at 1:00 pm. at the RAA-TR Hangar at the north end of Brampton Airport.

====== ==========

(North-West of Toronto, Ontario, Canada) (CNC3)

*** Note the START TIME !! There's going to be a LOT of interesting

stuff to cover, so...... We will start at 1:15 , and
try to finish about 4:00 -- to make things easier for those
who fly in, or drive in from long distances ...

*************************************************************************

Bring those 'tech support questions' and some things for Show 'n Tell
!

-------------------

-------------------

-------

We'll be in the hangar again - hope it warms up ! Dress warmly !!

(or maybe we can use the clubhouse again ... ;-) )

We hope the Black Sheep Rebel Squadron will be able to fly in
again - thanks for your support at the last meeting !

**********************************************************************

You don't want to miss all the fun, so PLEASE BE HERE for 1:00 !

**********************************************************************

---------- Digest Message #13 ----------
Date: Wed, 10 Nov 2010 21:14:38 -0900
From: kpierson@dcsol.com
To: allen hewko
Subject: RE: Catto props

Allen: Although I'm over a year away from needing a prop, I am
planning to purchase a "Catto" prop. Would you please tell what
you paid for it so I can budget for it. And also how much it weighs?

Thank you. Keith P. Taildraggers forever



On 11/10/2010 7:15 PM, Allen Hewko wrote to jessejenks@hotmail.com:

-> I recently installed a Catto prop and went with 78" to give me a little
more
-> clearance when on skis. I started out with 45 pitch, and had to get
repitched
-> to 47.5, which is just right, about 2750 rpm WOT level flight. I have a
150
Lyc
-> with a Pmag electronic ignition, which is giving me more power than
Craig
-> had calculated originally. Craig was great to deal with, the product
is
-> excellent, and I would recommend his prop. I believe he just came out
with a
-> nickel leading edge as well.
->
-> Allen H.
-> R151
->
->
-> On 11/10/2010 7:31 AM, jessejenks@hotmail.com wrote to rebel-builders:
->
-> ->
-> -> Hi guys, I'm contemplating a prop and right now I'm thinking of
going
with
-> a Catto. I looked on the archives and there is only a little
information
there.
-> Curt Martin has a 3 blade Catto that he loves. I wanted to go with a 2
blade
-> but not sure if I have enough ground clearance. Catto is suggesting a
-> diameter between 78"-82" and pitch from 42-46 (I have a 160hp O-320). I
-> don't quite have the engine hung yet to measure from prop flange to the
-> ground. I'm on 8.50 tires with Wayne's spring gear so I think I should
be
OK
-> with a 78" prop anyway. Can anyone provide some data points on both
prop
-> clearance with longer props and or Catto props on a Rebel?
-> -> Thanks much.
-> -> Jesse
-> ->
->


---------- Digest Message #14 ----------
Date: Wed, 10 Nov 2010 22:06:25 -0900
From: snowyrvr@mtaonline.net
To: rebel-builders
Subject: Rebel PArts Needed

Hello All,

I'm looking for any parts out there to make a complete left elevator for
my rebel. Need it all, skin, end caps, ribs, etc. I guess the skin and
end caps would be the hardest for me to make. Most of the other pieces I
can make. If anyone has anything they'd like to part with please let me
know. Thanks, Craig

---------- Digest Message #15 ----------
Date: Thu, 11 Nov 2010 08:08:48 -0500
From: jbcressman@aol.com
To: rebel-builders
Subject: Re: [rebel-builders] Daughter with Cancer..

Wayne....Judy and I are hoping and praying for you and your daughter. We
know well what you are going through as
we lived the scene with our 31 year old son last year and unfortunately
lost the battle. Be strong for her...she never needed you more than right
now. Bob Cressman 331R





-----Original Message-----
From: Wayne G. O'Shea <oifa@irishfield.on.ca>
To: rebel-builders@dcsol.com
Sent: Wed, Nov 10, 2010 8:29 pm
Subject: Re: [rebel-builders] Daughter with Cancer..


Thanks Keith, and everyone!

Wayne

----- Original Message -----
From: "Keith Leitch" <im_planecrazy@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 10, 2010 8:23 PM
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

My hopes and prayers go out to you and your family Wayne.
Keith

--- On Wed, 11/10/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear
To: rebel-builders@dcsol.com
Date: Wednesday, November 10, 2010, 6:39 PM


Thanks Mike.. we're sure hoping we have the luck of the Irish on our side
for the next battle in the family as well.... our 25 year old daughter
Jennifer, just diagnosed with Ewing's Sarcoma in her right pelvic bone.
One
of the rare bone cancers with only 40 or so diagnosis' a year in Canada
vs
the tens of thousands of other cancers..... starts Chemo on Monday. Gonna
be
a rough haul for her.. at a current 96lbs.. but she'll beat it !

Wayne

----- Original Message -----
From: "mike jones" <mfjrebel007r@cogeco.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 10, 2010 7:30 PM
Subject: RE: [rebel-builders] O-320 Exhaust valve guide wear

You got the luck of the irish on your side
Good to hear all is fixed and done

Cheers

Mike#007

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







---------- Digest Message #16 ----------
Date: Thu, 11 Nov 2010 08:59:01 EST
From: rebflyer@aol.com
To: rebel-builders
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

My thoughts and prayers to you and your family Wayne
Curt Martin


---------- Digest Message #17 ----------
Date: Thu, 11 Nov 2010 09:20:11 -0500
From: oifa@irishfield.on.ca
To: rebel-builders
Subject: Re: [rebel-builders] Daughter with Cancer..

Thanks Bob and we are truly sorry for your loss.

Wayne

----- Original Message -----
From: "Jbcressman" <jbcressman@aol.com>
To: <rebel-builders@dcsol.com>
Sent: Thursday, November 11, 2010 8:08 AM
Subject: Re: [rebel-builders] Daughter with Cancer..

Wayne....Judy and I are hoping and praying for you and your daughter. We
know well what you are going through as
we lived the scene with our 31 year old son last year and unfortunately
lost the battle. Be strong for her...she never needed you more than right
now. Bob Cressman 331R





-----Original Message-----
From: Wayne G. O'Shea <oifa@irishfield.on.ca>
To: rebel-builders@dcsol.com
Sent: Wed, Nov 10, 2010 8:29 pm
Subject: Re: [rebel-builders] Daughter with Cancer..


Thanks Keith, and everyone!

Wayne

----- Original Message -----
From: "Keith Leitch" <im_planecrazy@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 10, 2010 8:23 PM
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear

My hopes and prayers go out to you and your family Wayne.
Keith

--- On Wed, 11/10/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear
To: rebel-builders@dcsol.com
Date: Wednesday, November 10, 2010, 6:39 PM


Thanks Mike.. we're sure hoping we have the luck of the Irish on our
side
for the next battle in the family as well.... our 25 year old daughter
Jennifer, just diagnosed with Ewing's Sarcoma in her right pelvic bone.
One
of the rare bone cancers with only 40 or so diagnosis' a year in Canada
vs
the tens of thousands of other cancers..... starts Chemo on Monday.
Gonna
be
a rough haul for her.. at a current 96lbs.. but she'll beat it !

Wayne

----- Original Message -----
From: "mike jones" <mfjrebel007r@cogeco.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 10, 2010 7:30 PM
Subject: RE: [rebel-builders] O-320 Exhaust valve guide wear

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------









-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

---------- Digest Message #18 ----------
Date: Thu, 11 Nov 2010 09:04:57 -0600
From: siksc37@gmail.com
To: rebel-builders
Subject: Re: [rebel-builders] Daughter with Cancer..

Wayne,
Sorry to hear this news you your daughter and rest of your family will be
in
our thoughts and prays.

Si
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, November 11, 2010 8:20 AM
Subject: Re: [rebel-builders] Daughter with Cancer..

Thanks Bob and we are truly sorry for your loss.

Wayne

----- Original Message -----
From: "Jbcressman" <jbcressman@aol.com>
To: <rebel-builders@dcsol.com>
Sent: Thursday, November 11, 2010 8:08 AM
Subject: Re: [rebel-builders] Daughter with Cancer..

Wayne....Judy and I are hoping and praying for you and your daughter. We
know well what you are going through as
we lived the scene with our 31 year old son last year and unfortunately
lost the battle. Be strong for her...she never needed you more than
right
now. Bob Cressman 331R





-----Original Message-----
From: Wayne G. O'Shea <oifa@irishfield.on.ca>
To: rebel-builders@dcsol.com
Sent: Wed, Nov 10, 2010 8:29 pm
Subject: Re: [rebel-builders] Daughter with Cancer..


Thanks Keith, and everyone!

Wayne

----- Original Message -----
From: "Keith Leitch" <im_planecrazy@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 10, 2010 8:23 PM
Subject: Re: [rebel-builders] O-320 Exhaust valve guide wear




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------









-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

---------- Digest Message #19 ----------
Date: Thu, 11 Nov 2010 11:53:44 -0500
From: dale.kilbey@persona.ca
To: rebel-builders
Subject: Re: [rebel-builders] Daughter with Cancer..

Our thoughts and prayers are with you Wayne. I like your optimism.
Dale

List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

---------- Digest Message #20 ----------
Date: Thu, 11 Nov 2010 07:56:35 -0900
From: srwhitenect@dcsol.com
To: rebel builders
Subject: C-FJCI

Anyone have any knowledge of the Rebel on amphibs at the Villeniuve
airport
near Edmonton? Was built by Roland Pressner from the US and is currently
owned by a Roger KING of Spruce Grove, AB but based out of Fort
MacMurray. It's been sitting on the ground with the gear obviously not
under
any pressure and appears to be in an abandoned condition. Has not moved
for over a year and a half. Thanks to those who respond.

Steve W

---------- Digest Message #21 ----------
Date: Thu, 11 Nov 2010 11:58:23 -0500
From: oifa@irishfield.on.ca
To: rebel-builders
Subject: Re: [rebel-builders] Daughter with Cancer..

Thanks Dale, It's all we can do..... be optimistic and positive, as it's
gonna be a long haul for sure.

Not sure why she drew the bad health card. 2 years ago it was finally
surgery that fixed her 12 year battle with Crohn's and now this. She's a
fighter though.. during her Crohn's battle she still managed to attend
enough of her 4 years of University that she still graduated with
Honours...
and her surgery was in Feb of her final thesis term. She's got way too
much
ahead of her in life to not beat this as well.

Wayne

----- Original Message -----
From: "Dale Kilbey" <dale.kilbey@persona.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, November 11, 2010 11:53 AM
Subject: Re: [rebel-builders] Daughter with Cancer..

Our thoughts and prayers are with you Wayne. I like your optimism.
Dale

List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------