The Murphy Builders Site

Walters link has the df missing ( somehow got rapped and separated from
live link) at the end. .p verses .pdf

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Roland Kriening
Sent: November 4, 2010 1:51 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] LG 43 Assembly - Landing Gear

Thanks Walter, confirms my thoughts on the LG31. Unfortunately could not
open your file. I have the latest version of section 15.1 Slide Tube
Assembly, but given my older parts and no labeling, the diagrams and the
parts don't match. Specifically figure 15.1.4 indicates LG43, but seems
to
be made up of many parts and doublers. The only parts I can easily
identify
are the LG4 and 5. I do have two long tubes (with smaller doubler tubes
inside) marked LG37 which seem to have the hole indicated in the figure
just
mentioned.

Roland


-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Walter
Klatt
Sent: Thursday, November 04, 2010 11:43 AM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] LG 43 Assembly - Landing Gear

Do you have this?
http://www.pattersonaerosales.com/Aircr ... Landing_Ge
ar.p
df

LG31 is from the previous pre-1650 versions of the landing gear.

Walter

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Roland
Kriening
Sent: Thursday, November 04, 2010 8:07 AM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] LG 43 Assembly - Landing Gear

Hi All,

I have been trying to figure out the parts that make up the LG43
assembly. I
have kit #56, with some older parts, some new parts and some that don't
even
belong to the Rebel...??? If someone has a clear picture of their bungee
gear, specifically the assembly in question it would help me understand
where these various sized tubes and pieces fit. Some of my parts are not
labeled making things challenging. Also I have two 1/2 inch tubes
labeled LG
31. Cant find them in the parts list.

Roland
R56





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hi All,

I have been trying to figure out the parts that make up the LG43 assembly.
I have kit #56, with some older parts, some new parts and some that don't
even belong to the Rebel...??? If someone has a clear picture of their
bungee gear, specifically the assembly in question it would help me
understand where these various sized tubes and pieces fit. Some of my
parts are not labeled making things challenging. Also I have two 1/2 inch
tubes labeled LG 31. Cant find them in the parts list.

Roland
R56

Hi Roland !

You should check the size of your LG-44 .... Older Rebels
had lighter gear, as they were only 1,450 lb gross !

The lighter gear might be OK if you were using a light
engine like the Rotax 912, but you definitely should have
the heavier gear for an O-320, as you were planning.

I'm not positive, but I think the new LG-44's are 1 1/8"
square, and the old ones were 1" --- can anyone confirm ??
Memory isn't so good these days .... ;-)

--

......bobp
bobp@prosumers.ca
bobp@pattersys.com
http://www.Pattersys.com
http://www.amway.ca/BobPatterson


Any views expressed in this message are those of the individual sender
and do not necessarily reflect the views of any other entities or persons.
Any action taken as a result of the contents of this email is totally the
responsibility of the reader.


On November 4, 2010 11:07:10 am Roland Kriening wrote:

Hi All,

I have been trying to figure out the parts that make up the LG43
assembly.
I have kit #56, with some older parts, some new parts and some that don't
even belong to the Rebel...??? If someone has a clear picture of their
bungee gear, specifically the assembly in question it would help me
understand where these various sized tubes and pieces fit. Some of my
parts are not labeled making things challenging. Also I have two 1/2 inch
tubes labeled LG 31. Cant find them in the parts list.

Roland
R56

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hi Roland !

You should check the size of your LG-44 .... Older Rebels
had lighter gear, as they were only 1,450 lb gross !

The lighter gear might be OK if you were using a light
engine like the Rotax 912, but you definitely should have
the heavier gear for an O-320, as you were planning.

I'm not positive, but I think the new LG-44's are 1 1/8"
square, and the old ones were 1" --- can anyone confirm ??
Memory isn't so good these days .... ;-)

--

......bobp
bobp@prosumers.ca
bobp@pattersys.com
http://www.Pattersys.com
http://www.amway.ca/BobPatterson


Any views expressed in this message are those of the individual sender
and do not necessarily reflect the views of any other entities or persons.
Any action taken as a result of the contents of this email is totally the
responsibility of the reader.


On November 4, 2010 11:07:10 am Roland Kriening wrote:

Hi All,

I have been trying to figure out the parts that make up the LG43
assembly.
I have kit #56, with some older parts, some new parts and some that don't
even belong to the Rebel...??? If someone has a clear picture of their
bungee gear, specifically the assembly in question it would help me
understand where these various sized tubes and pieces fit. Some of my
parts are not labeled making things challenging. Also I have two 1/2 inch
tubes labeled LG 31. Cant find them in the parts list.

Roland
R56

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hi Roland !

You should check the size of your LG-44 .... Older Rebels
had lighter gear, as they were only 1,450 lb gross !

The lighter gear might be OK if you were using a light
engine like the Rotax 912, but you definitely should have
the heavier gear for an O-320, as you were planning.

I'm not positive, but I think the new LG-44's are 1 1/8"
square, and the old ones were 1" --- can anyone confirm ??
Memory isn't so good these days .... ;-)

--

......bobp
bobp@prosumers.ca
bobp@pattersys.com
http://www.Pattersys.com
http://www.amway.ca/BobPatterson


Any views expressed in this message are those of the individual

and do not necessarily reflect the views of any other entities or

Any action taken as a result of the contents of this email is totally

responsibility of the reader.


On November 4, 2010 11:07:10 am Roland Kriening wrote:

Hi All,

I have been trying to figure out the parts that make up the LG43

I have kit #56, with some older parts, some new parts and some

even belong to the Rebel...??? If someone has a clear picture of

bungee gear, specifically the assembly in question it would help me
understand where these various sized tubes and pieces fit. Some

parts are not labeled making things challenging. Also I have two

tubes labeled LG 31. Cant find them in the parts list.

Roland
R56