[rebel-builders] Wheel Skiis
Posted: Sun Feb 19, 2012 8:06 pm
At 05:57 PM 16/10/2010 -0700, you wrote:
I built a set of skiis that I shamelessly copied from the avid flyer
webpage. Avid is gone but I think you should still be able to google some
pictures. My origional mount had the skis hinged below the axle but this
week I drilled the ends of the axles for a 3/8"pin and have plans to
rebuild my skis a bit wider and hinge on ends of the axle. I also have
moved the die spring attach point up above the axle to expose the inboard
end.
Drew
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
If anyone could point me somewhere I would appreciate it. Thanks, CraigHas anyone messed with building wheel or penetration skiis for our rebel?
I built a set of skiis that I shamelessly copied from the avid flyer
webpage. Avid is gone but I think you should still be able to google some
pictures. My origional mount had the skis hinged below the axle but this
week I drilled the ends of the axles for a 3/8"pin and have plans to
rebuild my skis a bit wider and hinge on ends of the axle. I also have
moved the die spring attach point up above the axle to expose the inboard
end.
Drew
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------